Package: 7zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 7002
Maintainer: YOKOTA Hiroshi <yokota.hgml@gmail.com>
Architecture: amd64
Version: 24.09+dfsg-8
Replaces: p7zip (<= 16.02+dfsg-8), p7zip-full (<= 16.02+dfsg-8)
Provides: p7zip, p7zip-full
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 14)
Suggests: 7zip-standalone, 7zip-rar
Breaks: p7zip (<= 16.02+dfsg-8), p7zip-full (<= 16.02+dfsg-8)
Description: 7-Zip file archiver with a high compression ratio
 7-Zip is a file archiver with a high compression ratio. The main features
 of 7-Zip are:
  * High compression ratio in 7z format with LZMA and LZMA2 compression
  * Supported formats:
      * Packing / unpacking: 7z, XZ, BZIP2, GZIP, TAR, ZIP and WIM
      * Unpacking only: AR, ARJ, CAB, CHM, CPIO, CramFS, DMG, EXT, FAT,
          GPT, HFS, IHEX, ISO, LZH, LZMA, MBR, MSI, NSIS, NTFS, QCOW2,
          RPM, SquashFS, UDF, UEFI, VDI, VHD, VMDK, WIM, XAR and Z.
  * For ZIP and GZIP formats, 7-Zip provides a compression ratio that is
      2-10 % better than the ratio provided by PKZip and WinZip
  * Strong AES-256 encryption in 7z and ZIP formats
  * Powerful command line version
 .
 "7zip" provides:
  * /usr/bin/7z:  Full featured with plugin functionality.
  * /usr/bin/7za: Major formats/features only.
  * /usr/bin/7zr: LZMA (.7z, .lzma, .xz) only. Minimal executable.
 .
 Note: The unRAR code was dropped to keep compatible with DFSG.
       Install 7zip-rar package in non-free section to use RAR files.
Homepage: https://www.7-zip.org/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 428
Maintainer: Debian Adduser Developers <adduser@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.152
Depends: passwd (>= 1:4.17.2-5)
Suggests: liblocale-gettext-perl, perl, cron, quota
Conffiles:
 /etc/adduser.conf ef23042097ebb0d1075254f888c3c394
 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 'Adduser' will choose UID and GID values that conform to Debian policy,
 create a home directory, copy skeletal user configuration, and
 automate setting initial values for the user's password, real name
 and so on.
 .
 'Deluser' can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
 'Adduser' and 'Deluser' are intended to be used by the local
 administrator in lieu of the tools from the 'useradd' suite, and
 they provide support for easy use from Debian package maintainer
 scripts, functioning as kind of a policy layer to make those scripts
 easier and more stable to write and maintain.

Package: antiword
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 587
Maintainer: Olly Betts <olly@survex.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.37-17
Depends: libc6 (>= 2.34)
Description: Converts MS Word files to text, PS, PDF and XML
 Antiword is a free MS Word reader.
 .
 It converts the binary files from MS Word 2, 6, 7, 97, 2000 and 2003 to text,
 Postscript, PDF and XML.
 .
 Note that it doesn't support the XML-based formats which newer MS Word
 versions produce by default (.docx).

Package: apt
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4480
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 3.0.3
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 3.0.3)
Depends: base-passwd (>= 3.6.1) | adduser, sqv (>= 1.3.0), libapt-pkg7.0 (>= 3.0.3), debian-archive-keyring, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libseccomp2 (>= 2.4.2), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conflicts: apt-verify, libnettle8 (<< 3.9.1-2.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce
 /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.

Package: apt-utils
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1086
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Source: apt
Version: 3.0.3
Depends: apt (= 3.0.3), libapt-pkg7.0 (>= 2.9.27+exp1), libc6 (>= 2.34), libdb5.3t64, libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 350
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 13.8+deb13u1
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base, usr-is-merged
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 9b6795c01c379a22adfe37678f96c0a3
 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue d0c7919a5e2641d60400de08201a49e2
 /etc/issue.net 37827eb4e7d268f39255c01fc49b009e
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 272
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6.7
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 7196
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bash (5.2.37-2)
Version: 5.2.37-2+b5
Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.38), libtinfo6 (>= 6)
Recommends: bash-completion
Suggests: bash-doc
Conffiles:
 /etc/bash.bashrc 72d453119aaa1e96c7c8a7a8fedcf582
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 401
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.41-5)
Version: 1:2.41-5
Pre-Depends: libc6 (>= 2.38), libsystemd0 (>= 254)
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a Debian
 system: logger, renice, script, scriptlive, scriptreplay and wall. The
 remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://github.com/util-linux/util-linux

Package: ca-certificates
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 390
Maintainer: Julien Cristau <jcristau@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20250419
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: clamav-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 154
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: clamav
Version: 1.4.3+dfsg-1
Depends: adduser, logrotate, ucf, debconf (>= 0.5) | debconf-2.0
Recommends: clamav
Description: anti-virus utility for Unix - base package
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package mainly manages the clamav system account. It is not really
 useful without the clamav or clamav-daemon package.
Homepage: https://www.clamav.net/

Package: clamav-daemon
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1036
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-1
Depends: adduser, clamav-base (= 1.4.3+dfsg-1), clamav-freshclam (>= 1.4.3+dfsg) | clamav-data, dpkg (>= 1.16.1), procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libclamav12 (>= 1.4.3), libcurl4t64 (>= 7.18.2), libncurses6 (>= 6), libsystemd0, libtinfo6 (>= 6), zlib1g (>= 1:1.2.0.2)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: clamdscan
Suggests: libclamunrar, apparmor, clamav-doc, daemon
Conffiles:
 /etc/apparmor.d/usr.sbin.clamd 07045decaefc0faed26a3e2515c0ff9e
 /etc/init.d/clamav-daemon 382ae9b358076d8a3e5d5d0818796e50
 /etc/logcheck/ignore.d.paranoid/clamav-daemon a2d0bd9c56a1b58dc939b4eb84d92206
 /etc/logcheck/ignore.d.server/clamav-daemon 5124f89490b134ebe8bb898f41c25e79
Description: anti-virus utility for Unix - scanner daemon
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains the daemon featuring:
  - fast, multi-threaded daemon;
  - easy integration with MTA's;
  - support for on-access scanning;
  - remote scanning;
  - able to be run supervised by daemon.
Homepage: https://www.clamav.net/

Package: clamav-freshclam
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 373
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-1
Provides: clamav-data
Depends: clamav-base (>= 1.4.3+dfsg-1), dpkg (>= 1.16.1), logrotate, procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libclamav12 (>= 1.4.3)
Recommends: ca-certificates
Suggests: apparmor, clamav-doc
Conflicts: clamav-data, libclamav2, libclamav3
Conffiles:
 /etc/apparmor.d/usr.bin.freshclam e201b670a6a1502573ed48b3c75413fe
 /etc/init.d/clamav-freshclam 78639f5006295d13a6435377b9ea94e0
 /etc/logcheck/ignore.d.server/clamav-freshclam eea142f7981a84fa4381e21165c987c3
 /etc/network/if-down.d/clamav-freshclam-ifupdown f7f9fc8f12657591092efd3c4b5b5fe7
 /etc/network/if-up.d/clamav-freshclam-ifupdown f7f9fc8f12657591092efd3c4b5b5fe7
 /etc/ppp/ip-down.d/clamav-freshclam-ifupdown f7f9fc8f12657591092efd3c4b5b5fe7
 /etc/ppp/ip-up.d/clamav-freshclam-ifupdown f7f9fc8f12657591092efd3c4b5b5fe7
Description: anti-virus utility for Unix - virus database update utility
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains the freshclam program and scripts to automate virus
 database updating. It relies on an Internet connection, but can be
 run in a variety of ways to compensate for intermittent connections.
Homepage: https://www.clamav.net/

Package: clamdscan
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 222
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Source: clamav
Version: 1.4.3+dfsg-1
Depends: clamav-base (= 1.4.3+dfsg-1), libc6 (>= 2.38), libclamav12 (>= 1.4.3)
Suggests: clamav-daemon, clamav-doc
Description: anti-virus utility for Unix - scanner client
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 This package contains clamdscan, the command line interface of the clamav
 daemon.
Homepage: https://www.clamav.net/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 18457
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.7-3
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.48), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libsystemd0 (>= 254)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: https://gnu.org/software/coreutils

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1197
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15+dfsg-2
Replaces: cpio-mt
Depends: libc6 (>= 2.38)
Suggests: libarchive-dev
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: https://www.gnu.org/software/cpio/

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 249
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-197
Replaces: bcron, cronie, systemd-cron
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), sensible-utils, libpam-runtime
Pre-Depends: init-system-helpers (>= 1.54~), cron-daemon-common
Recommends: default-mta | mail-transport-agent
Suggests: anacron, logrotate, checksecurity, supercat, bat
Conflicts: bcron, cronie, systemd-cron
Conffiles:
 /etc/default/cron c3a7b773d9234e1948c5885753bb7c05
 /etc/init.d/cron af02c6044a6166137218843d7556e2fd
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
 /etc/supercat/spcrc-crontab f4a36df1ac8298dc249f712026bafff8
 /etc/supercat/spcrc-crontab-light ed8b59882050d7de508a1eab088734e9
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/

Package: cron-daemon-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 56
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: all
Multi-Arch: foreign
Source: cron
Version: 3.0pl1-197
Replaces: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, adduser
Breaks: systemd-cron (<< 1.15.19-5~)
Conflicts: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.yearly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab e34d8e317f0057ea65f179d5b35d699c
Description: process scheduling daemon's configuration files
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 This package provides configuration files which must be there to
 define scheduled process sets.
Homepage: https://ftp.isc.org/isc/cron/

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 494
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.14.1-2
Depends: libc6 (>= 2.34), libcurl4t64 (= 8.14.1-2), zlib1g (>= 1:1.1.4)
Recommends: bash-completion
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: https://curl.se/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 207
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.12-12
Depends: debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.38)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 154
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.16.2-2
Provides: dbus-system-bus (= 1.16.2-2), default-dbus-system-bus
Depends: dbus-bin (= 1.16.2-2), dbus-daemon (= 1.16.2-2), dbus-system-bus-common (>= 1.16.2-2), base-files (>= 13.4~), libc6 (>= 2.34), libdbus-1-3 (= 1.16.2-2), libexpat1 (>= 2.1~beta3), libsystemd0
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (system message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package provides a fully-functional D-Bus system bus with activation
 support, used for communication between system services, and depends on
 most of the other components of the reference implementation of D-Bus.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 190
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: libc6 (>= 2.38), libdbus-1-3 (= 1.16.2-2)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (command line utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the D-Bus command-line utilities such as dbus-send
 and dbus-monitor.
Homepage: https://dbus.freedesktop.org/

Package: dbus-daemon
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 352
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: dbus-bin (= 1.16.2-2), dbus-session-bus-common (>= 1.16.2-2), libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.16.2-2), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (reference message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains dbus-daemon, the reference implementation of a
 D-Bus message bus, and dbus-run-session, a utility to start a temporary
 session dbus-daemon in a constrained environment or for automated tests.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-session-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 80
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (session bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus session bus, used for applications and per-user services.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-system-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 91
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: adduser (>= 3.130) | systemd-sysusers
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (system bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus system bus, used for system services such as networking and
 storage management services. It is also responsible for creating the
 'messagebus' system user account used to run the system bus.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus system bus, install one of the packages
 that implement the dbus-system-bus virtual package, such as dbus.
 The recommended implementation is indicated by the default-dbus-system-bus
 virtual package.
Homepage: https://dbus.freedesktop.org/

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 497
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.91
Replaces: debconf-tiny
Provides: debconf-2.0
Recommends: apt (>= 2.9.11~) | apt-utils, debconf-i18n
Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog
Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 1cd82ead5651f0753b1ff6d9b31bd235
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 842
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.91
Depends: debconf (= 1.5.91), liblocale-gettext-perl, libtext-charwidth-perl, libtext-iconv-perl, libtext-wrapi18n-perl
Conflicts: debconf-english
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 302
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2025.1
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.asc 55eec060916a9d4a0db7560ab4d7bdce
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.asc bec0a1224f667bcd1e231b874db9bc4f
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.asc fac2ec9faba2c2d82c70a6e2805c5b79
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.asc 1f30ce1ba8532d523017acb1a69c106a
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.asc 9fbe7b0d8ebb38e240aeec6b0830ac7b
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.asc 85a4c0e5c747a38509b33562d4c950be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-automatic.asc 556202307f6f23e343c1ba12790507be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-security-automatic.asc f421db9e00d9a98c66c396b2a210f52c
 /etc/apt/trusted.gpg.d/debian-archive-trixie-stable.asc 91c5c0b4f6878239622087c64866c909
Description: OpenPGP archive certificates of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive certificates used for that.

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 225
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.23.2
Pre-Depends: libc6 (>= 2.38)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 update-shells which

Package: dhcpcd-base
Status: install ok installed
Priority: important
Section: net
Installed-Size: 495
Maintainer: Martin-Éric Racine <martin-eric.racine@iki.fi>
Architecture: amd64
Source: dhcpcd
Version: 1:10.1.0-11
Replaces: dhcpcd5 (<< 1:10.1.0-11~)
Provides: dhcp-client
Depends: adduser, libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libudev1 (>= 183)
Suggests: openresolv | resolvconf | systemd-resolved
Breaks: dhcpcd5 (<< 1:10.1.0-11~)
Conffiles:
 /etc/dhcpcd.conf 58826155990dfac24adf63c14b45fa9e
Description: DHCPv4 and DHCPv6 dual-stack client (binaries and exit hooks)
 dhcpcd provides seamless IPv4 and IPv6 auto-configuration:
  * DHCPv4 client
  * DHCPv6 client with Prefix Delegation (PD) support
  * IPv4LL support (ZeroConf)
  * IPv6RS support (SLAAC)
  * ARP address conflict resolution
  * ARP ping profiles
  * Wireless SSID profiles
 .
 This package provides the binaries, exit hooks and manual pages.
 .
 It offers a dual-stack substitute for ISC DHCP Client (dhclient) on systems
 where interfaces are configured by ifupdown via </etc/network/interfaces>
 using the DHCP method.
 .
 The init.d script and systemd service required for systems without ifupdown
 are packaged separately as dhcpcd.
 .
 Since Debian 12 (Bookworm), dhcpcd uses Predictable Network Interface Names
 on Linux ports. See NEWS.Debian for more details.
Homepage: https://github.com/NetworkConfiguration/dhcpcd

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1768
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.10-4
Replaces: diff
Pre-Depends: libc6 (>= 2.38)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 967
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21)
Version: 2.4.7-21+b3
Depends: adduser, gpgconf (= 2.4.7-21+b3), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgnutls30t64 (>= 3.8.1), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libldap2 (>= 2.6.2), libnpth0t64 (>= 1.8)
Recommends: gnupg (= 2.4.7-21)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 229
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6-2
Depends: libc6 (>= 2.34)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/

Package: docx2txt
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 49
Maintainer: Barak A. Pearlmutter <bap@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.4-5
Depends: unzip
Description: Convert Microsoft OOXML files to plain text
 This tool attempts to generate equivalent plain text files from
 Microsoft .docx documents, preserving some formatting and document
 information (which MS text conversion drops) along with appropriate
 character conversions for a good (ascii or utf-8) text experience.
 It is a platform independent solution consisting of (core) Perl and
 (wrapper) Unix/Windows shell scripts and a configuration file to
 control the output text appearance to a fair extent.  It can very
 conveniently be used to build a Web-based docx document conversion
 service.  Some Makefiles and Windows batch files are provided for
 easy installation of the scripts.  With unzippers like CakeCmd that
 can deal with corrupt Zip archives, this tool can extract text from
 corrupt docx documents in many cases, where MS Word fails to even
 open them.
Homepage: http://docx2txt.sourceforge.net

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6587
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.22.21
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: e2fsprogs
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1537
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b3
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libext2fs2t64 (= 1.47.2-3+b3), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static, libarchive13t64
Conffiles:
 /etc/cron.d/e2scrub_all 244b6578e16a06d6fd61269241931284
 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
 /etc/mke2fs.conf 6ce04fdb2ca015186862d66bcab35311
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes

Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 775
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Version: 1:6.14.2-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Conffiles:
 /etc/network/if-pre-up.d/ethtool 09b4a447e5048a4ea0bc34732bd0278c
 /etc/network/if-up.d/ethtool a522a7b2b1d3e2d9a06e9690674a5d38
Description: display or change Ethernet device settings
 ethtool can be used to query and change settings such as speed, auto-
 negotiation and checksum offload on many network devices, especially
 Ethernet devices.
Homepage: https://www.kernel.org/pub/software/network/ethtool/

Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 529
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41-5
Depends: libc6 (>= 2.38), libfdisk1 (= 2.41-5), libmount1 (= 2.41-5), libncursesw6 (>= 6), libreadline8t64 (>= 6.0), libsmartcols1 (= 2.41-5), libtinfo6 (>= 6)
Recommends: sensible-utils
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utility gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://github.com/util-linux/util-linux

Package: fetchmail
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 788
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 6.4.39-1+pmg2
Replaces: fetchmail-common, fetchmail-ssl
Provides: fetchmail-ssl
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libssl3t64 (>= 3.1.4), debianutils (>= 1.7), adduser (>= 3.34), sysvinit-utils (>= 3.05-4~) | lsb-base
Pre-Depends: init-system-helpers (>= 1.52)
Recommends: ca-certificates
Suggests: fetchmailconf, default-mta | mail-transport-agent, resolvconf
Breaks: fetchmail-ssl (<= 6.2.5-12), logcheck (<< 1.1.1-9)
Conflicts: fetchmail-common
Conffiles:
 /etc/default/fetchmail b31c8e280584914c740f934addc43df7
 /etc/logcheck/ignore.d.server/fetchmail 6101615b070075e66af7ef37f7dfce5a
 /etc/logcheck/ignore.d.workstation/fetchmail 146fd6b66af55a04a9a680bb0010b0f3
 /etc/ppp/ip-down.d/fetchmail b040141f836d40d1fff1ac24408cd049
 /etc/ppp/ip-up.d/fetchmail aa436cc36b86d8bdd9395d8893ddcd8e
 /etc/resolvconf/update-libc.d/fetchmail 3a45a507342c7f7a2cf239a1f1ada86a
Description: SSL enabled POP3, APOP, IMAP mail gatherer/forwarder
 fetchmail is a free, full-featured, robust, and well-documented remote mail
 retrieval and forwarding utility intended to be used over on-demand TCP/IP
 links (such as SLIP or PPP connections).  It retrieves mail from remote mail
 servers and forwards it to your local (client) machine's delivery system, so
 it can then be read by normal mail user agents such as mutt, elm, pine,
 (x)emacs/gnus, or mailx.  The fetchmailconf package includes an interactive
 GUI configurator suitable for end-users.
 .
 Kerberos V and GSSAPI are supported.
 .
 Kerberos IV,  RPA, OPIE and other support for some other features are
 available if the package is recompiled.
Homepage: https://www.fetchmail.info

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2160
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.10.0-3
Pre-Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~)
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/

Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 681
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15.0-2.3
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 533
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: fontconfig
Version: 2.15.0-2.3
Depends: debconf (>= 0.5) | debconf-2.0, fonts-dejavu-core | fonts-liberation | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre | fonts-noto-core
Breaks: libfontconfig1 (<< 2.13.0)
Conffiles:
 /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d
 /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2292
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Depends: fonts-dejavu-mono
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif and serif-bold
 variants. For additional variants, see the fonts-dejavu-mono and
 fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1281
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Replaces: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Breaks: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the monospaced variants. For additional
 variants, see the fonts-dejavu-core and fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-font-awesome
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1369
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.0.10+really4.7.0~dfsg-4.1
Provides: node-font-awesome (= 4.7.0~5.0.10+really4.7.0~dfsg-4.1), sass-stylesheets-fonts-awesome
Enhances: libjs-twitter-bootstrap, node-less, sass
Description: iconic font designed for use with Twitter Bootstrap
 This font contains about 249 various icon glyphs. Glyphs are designed
 as scalable vector graphics hence display very well at any screen
 size. This font was basically designed to be used with the Twitter
 bootstrap  library but can be used in other places also.
 .
 This package also provides Sass and LESS files to use webfonts from
 this package.
 .
 Please note that this package provides Font Awesome 4
 (not Font Awesome 5 or Font Awesome 6
 which are different fonts with different licensing).
Homepage: http://fontawesome.io/

Package: gcc-14-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: gnupg
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 468
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.7-21
Depends: dirmngr (<< 2.4.7-21.1~), dirmngr (>= 2.4.7-21), gnupg-l10n (= 2.4.7-21), gpg (<< 2.4.7-21.1~), gpg (>= 2.4.7-21), gpg-agent (<< 2.4.7-21.1~), gpg-agent (>= 2.4.7-21), gpgsm (<< 2.4.7-21.1~), gpgsm (>= 2.4.7-21)
Recommends: gnupg-utils (<< 2.4.7-21.1~), gnupg-utils (>= 2.4.7-21), gpg-wks-client (<< 2.4.7-21.1~), gpg-wks-client (>= 2.4.7-21), gpgv (<< 2.4.7-21.1~), gpgv (>= 2.4.7-21)
Suggests: gpg-wks-server (<< 2.4.7-21.1~), gpg-wks-server (>= 2.4.7-21), parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.4.7-21), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.
Homepage: https://www.gnupg.org/

Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 5010
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.7-21
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/

Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1594
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21)
Version: 2.4.7-21+b3
Replaces: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4)
Provides: keyboxd (= 2.4.7-21+b3)
Depends: gpgconf (= 2.4.7-21+b3), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0), libsqlite3-0 (>= 3.14.0), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.4.7-21)
Breaks: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4)
Description: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/

Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 899
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21)
Version: 2.4.7-21+b3
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.4.7-21+b3), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libnpth0t64 (>= 1.2)
Recommends: gnupg (= 2.4.7-21)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon, tpm2daemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent 444b1f7d2bc0f05b8fff51f58bd99ed9
 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.
Homepage: https://www.gnupg.org/

Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 371
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21)
Version: 2.4.7-21+b3
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.48), libreadline8t64 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/

Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 664
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21)
Version: 2.4.7-21+b3
Depends: gpgconf (= 2.4.7-21+b3), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0)
Recommends: gnupg (= 2.4.7-21)
Description: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1266
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.11-4
Provides: rgrep
Pre-Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.32)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: https://www.gnu.org/software/grep/

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 256
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Version: 1.13-1
Pre-Depends: libc6 (>= 2.38)
Suggests: less
Conflicts: zutils (<< 1.13-2~)
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 50
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: amd64
Version: 3.25
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: ifupdown2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1759
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 3.3.0-1+pmx10
Replaces: ifupdown
Provides: ifupdown
Depends: python3:any, iproute2, python3-six, python3-setuptools, python3-systemd, ethtool
Suggests: isc-dhcp-client, bridge-utils, python3-gvgen, python3-mako
Conflicts: ifupdown
Conffiles:
 /etc/default/networking ffde2818f56883d55765989ce18b7492
 /etc/network/ifupdown2/addons.conf a52108e7dc024073687db344227585b8
 /etc/network/ifupdown2/ifupdown2.conf 843f569c26556172c060ead530d966d7
Description: Network Interface Management tool similar to ifupdown
 ifupdown2 is ifupdown re-written in Python. It replaces ifupdown and provides
 the same user interface as ifupdown for network interface configuration.
 Like ifupdown, ifupdown2 is a high level tool to configure (or, respectively
 deconfigure) network interfaces based on interface definitions in
 /etc/network/interfaces. It is capable of detecting network interface
 dependencies and comes with several new features which are available as
 new command options to ifup/ifdown/ifquery commands. It also comes with a new
 command ifreload to reload interface configuration with minimum
 disruption. Most commands are also capable of input and output in JSON format.
 It is backward compatible with ifupdown /etc/network/interfaces format and
 supports newer simplified format. It also supports interface templates with
 python-mako for large scale interface deployments. See
 /usr/share/doc/ifupdown2/README.rst for details about ifupdown2. Examples
 are available under /usr/share/doc/ifupdown2/examples.
Homepage: https://github.com/cumulusnetworks/ifupdown2

Package: init
Protected: yes
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 17
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.69~deb13u1
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 133
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.69~deb13u1
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 3774
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.15.0-1
Replaces: iproute2-doc
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libc6 (>= 2.38), libcap2 (>= 1:2.10), libdb5.3t64, libelf1t64 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Suggests: python3:any
Breaks: iproute2-doc
Conflicts: arpd
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 187
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20240905-3
Provides: ping
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Recommends: linux-sysctl-defaults
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Homepage: https://github.com/iputils/iputils/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2884
Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.3-P1-8
Provides: dhcp-client
Depends: libc6 (>= 2.38), debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conflicts: isc-dhcp-client-ddns (<< 4.4.3-P1-4.1)
Conffiles:
 /etc/apparmor.d/usr.sbin.dhclient 086451165ca0fa9290b556260ba6d7fe
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-enter-hooks.d/resolved-enter 4ecfd14e38e7362cd6aeb3e438c2ec43
 /etc/dhcp/dhclient-exit-hooks.d/resolved 716b09be4007df8a828a1af7b37baefc
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address (deprecated)
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
 .
 ISC has decided to stop maintaining the client and relay parts of isc-dhcp,
 and they will be removed after the 4.4.3 release, keeping only the server
 component. Please, consider using an alternative for isc-dhcp-client
 (dhclient).
 .
 More information can be found in the ISC official announcement:
 https://www.isc.org/blogs/dhcp-client-relay-eom/
 .
 ISC has deprecated the DHCP project. See:
 https://www.isc.org/blogs/isc-dhcp-eol/.
Homepage: http://www.isc.org

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 255
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 34.2-2
Replaces: bash-completion (<< 1:2.16.0-1)
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libkmod2 (= 34.2-2)
Breaks: bash-completion (<< 1:2.16.0-1)
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 376
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 668-1
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: libacl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl (2.3.2-2)
Version: 2.3.2-2+b1
Depends: libc6 (>= 2.38)
Description: access control list - shared library
 This package contains the shared library containing the POSIX 1003.1e
 draft standard 17 functions for manipulating access control lists.
Homepage: https://savannah.nongnu.org/projects/acl/

Package: libanyevent-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 81
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.25-2
Depends: perl:any, libanyevent-perl, libcommon-sense-perl
Description: simple non-blocking HTTP/HTTPS client
 AnyEvent::HTTP is a simple non-blocking HTTP/HTTPS client implementation,
 which uses AnyEvent under the hood for asynchronous I/O. It supports GET,
 POST and other request methods, cookies and more. It is well suited to most
 HTTP tasks, while retaining fine-grained control over request and response
 headers to cater to more complex requirements.
Homepage: https://metacpan.org/release/AnyEvent-HTTP

Package: libanyevent-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 907
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libanyevent-perl (7.170-2)
Version: 7.170-2+b7
Depends: perl, perlapi-5.40.0
Recommends: libasync-interrupt-perl, libev-perl | libevent-perl, libguard-perl
Suggests: libev-perl, libevent-perl, libio-async-perl, libjson-perl | libjson-xs-perl, libnet-ssleay-perl, libpoe-perl, libtask-weaken-perl
Description: event loop framework with multiple implementations
 AnyEvent is not an event model itself, it only interfaces to whatever event
 model the main program happens to use, in a pragmatic way. For event models,
 the statement "there can only be one" is a bitter reality: In general, only
 one event loop can be active at the same time in a process. This module
 cannot change this, but it can hide the differences between them.
 .
 The goal of AnyEvent is to offer module authors the ability to do event
 programming (waiting for I/O or timer events) without subscribing to a
 religion, a way of living, and most importantly: without forcing your module
 users into the same thing by forcing them to use the same event model you use.
 .
 During the first call of any watcher-creation method, the module tries to
 detect the currently loaded event loop by probing whether one of the
 following modules is already loaded: EV, AnyEvent::Loop, Event, Glib, Tk,
 Event::Lib, Qt, POE. The first one found is used. If none are detected, the
 module tries to load the first four modules in the order given; but note that
 if EV is not available, the pure-perl AnyEvent::Loop should always work, so
 the other two are not normally tried.
Homepage: https://metacpan.org/release/AnyEvent

Package: libapparmor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 4.1.1-pmx1
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.38)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
 libapparmor1 provides a shared library one can compile programs
 against in order to use various AppArmor functionality,
 such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/

Package: libappconfig-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 187
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Architecture: all
Multi-Arch: foreign
Source: appconfig
Version: 1.71-2.3
Depends: perl:any
Description: Perl module for configuration file and command line handling
 AppConfig is a bundle of Perl5 modules for reading configuration
 files and parsing command line arguments.  Note that writing
 configuration files is not supported at this time.
 .
 AppConfig supports a relaxed configuration file syntax with support
 for flags (booleans), single and multivalue (lists or hashes)
 items.  A defined default and validation routine or regex can be
 defined for each option.
 .
 Environment variable, file variable and tilde (~) are supported and
 may be applied to selected configuration options.  For long blocks of
 text you can also use Perl HEREDOC syntax.  Additionally there is
 also a mechanism to utilise all these same features via a CGI.

Package: libapt-pkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 221
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: amd64
Version: 0.1.42
Depends: perl (>= 5.40.1-3), perlapi-5.40.1, libapt-pkg7.0 (>= 2.1.20), libc6 (>= 2.34), libgcc-s1 (>= 3.0)
Description: Perl interface to libapt-pkg
 A Perl interface to APT's libapt-pkg which provides modules for configuration
 file/command line parsing, version comparison, inspection of the binary
 package cache and source package details.

Package: libapt-pkg7.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3855
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 3.0.3
Provides: libapt-pkg (= 3.0.3)
Depends: libbz2-1.0, libc6 (>= 2.38), libgcc-s1 (>= 3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.8), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 3.0.3)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Conflicts: libnettle8 (<< 3.9.1-2.2~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom and
    http(s) as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).

Package: libarchive-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 99
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Version: 3.7.4.1
Depends: perl (>= 5.40.1-6), perlapi-5.40.1, libarchive13t64 (>= 3.0.4), libc6 (>= 2.4)
Description: Perl extension to access libarchive functions
 This module provides access to various archive formats using libarchive.

Package: libarchive-zip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 318
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.68-1
Depends: perl:any
Description: Perl module for manipulation of ZIP archives
 The Archive::Zip module allows a Perl program to create, manipulate,
 read, and write Zip archive files.
 .
 Zip archives can be created, or you can read from existing zip files.
 Once created, they can be written to files, streams, or strings.
 .
 Members can be added, removed, extracted, replaced, rearranged, and
 enumerated.  They can also be renamed or have their dates, comments,
 or other attributes queried or modified.  Their data can be
 compressed or uncompressed as needed.  Members can be created from
 members in existing Zip files, or from existing directories, files,
 or strings.
Homepage: https://metacpan.org/release/Archive-Zip

Package: libarchive13t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 880
Maintainer: Peter Pentchev <roam@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libarchive
Version: 3.7.4-4
Replaces: libarchive13
Provides: libarchive13 (= 3.7.4-4)
Depends: libacl1 (>= 2.2.23), libbz2-1.0, libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.2.2), libnettle8t64, libxml2 (>= 2.7.4), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: lrzip
Breaks: libarchive13 (<< 3.7.4-4)
Description: Multi-format archive and compression library (shared library)
 The libarchive library provides a flexible interface for reading and writing
 archives in various formats such as tar and cpio. libarchive also supports
 reading and writing archives compressed using various compression filters such
 as gzip and bzip2. The library is inherently stream-oriented; readers serially
 iterate through the archive, writers serially add things to the archive.
 .
 Archive formats supported are:
 .
    * tar (read and write, including GNU extensions)
    * pax (read and write, including GNU and star extensions)
    * cpio (read and write, including odc and newc variants)
    * iso9660 (read and write, including Joliet and Rockridge extensions, with
      some limitations)
    * zip (read only, with some limitations, uses zlib)
    * mtree (read and write)
    * shar (write only)
    * ar (read and write, including BSD and GNU/SysV variants)
    * empty (read only; in particular, note that no other format will accept an
      empty file)
    * raw (read only)
    * xar (read only)
    * rar (read only, with some limitations)
    * 7zip (read and write, with some limitations)
 .
 Filters supported are:
 .
    * gzip (read and write, uses zlib)
    * bzip2 (read and write, uses bzlib)
    * compress (read and write, uses an internal implementation)
    * uudecode (read only)
    * separate command-line compressors with fixed-signature auto-detection
    * xz and lzma (read and write using liblzma)
    * zstandard (read and write using libzstd)
 .
 This package provides the libarchive shared library.
Homepage: https://www.libarchive.org/

Package: libassuan9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 3.0.2-2
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html

Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/

Package: libattr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.2-3
Depends: libc6 (>= 2.4)
Conffiles:
 /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: https://savannah.nongnu.org/projects/attr/

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:4.0.2-2
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit (1:4.0.2-2)
Version: 1:4.0.2-2+b2
Depends: libaudit-common (>= 1:4.0.2-2), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libauthen-pam-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 82
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libauthen-pam-perl (0.16-6)
Version: 0.16-6+b4
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.14), libpam0g (>= 0.99.7.1)
Description: Perl interface to PAM library
 The Authen::PAM module provides a Perl interface to the PAM library.
 It provides compatibility with both newer and older PAM libraries,
 allowing the use of any of the known names for a give constant.
Homepage: https://metacpan.org/release/Authen-PAM

Package: libb-hooks-op-check-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 48
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libb-hooks-op-check-perl (0.22-3)
Version: 0.22-3+b2
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.3)
Description: Perl wrapper for OP check callbacks
 B::Hooks::OP::Check provides an interface for XS modules to hook into the
 callbacks of PL_check, which is part of perl's core. It allows a C function to
 be invoked as the last stage of optree compilation, depending on the given op
 code number (op_type).
Homepage: https://metacpan.org/release/B-Hooks-OP-Check

Package: libberkeleydb-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 392
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Version: 0.66-1
Depends: libc6 (>= 2.14), libdb5.3t64, perl (>= 5.40.0-6), perlapi-5.40.0
Description: use Berkeley DB databases from Perl
 Provides BerkeleyDB::Hash, BerkeleyDB::Btree etc. classes that allow
 access to Berkeley DB databases as if they were normal Perl hash
 tables.
 .
 Supports all the features of Berkeley DB such as sharing cache and
 lock memory between processes, logging and transactions.
Homepage: https://github.com/pmqs/BerkeleyDB

Package: libblkid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 449
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Depends: libc6 (>= 2.38)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Homepage: https://github.com/util-linux/util-linux

Package: libbpf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 452
Maintainer: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: libbpf (1.5.0-3)
Version: 1:1.5.0-3
Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.

Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 870
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: brotli (1.1.0-2)
Version: 1.1.0-2+b7
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs shared libraries.
Homepage: https://github.com/google/brotli

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.12.2-2
Depends: libc6 (>= 2.38), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: libbytes-random-secure-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 69
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.29-3
Depends: perl:any, libcrypt-random-seed-perl, libmath-random-isaac-perl
Description: Perl extension to generate cryptographically-secure random bytes
 Bytes::Random::Secure provides two interfaces for obtaining crypt-quality
 random bytes. The simple interface is built around plain functions. For
 greater control over the Random Number Generator's seeding, there is an
 Object Oriented interface that provides much more flexibility.
 .
 The "functions" interface provides five functions that can be used any time
 you need a string (or MIME Base64 representation, or hex-digits
 representation, or Quoted Printable representation) of a specific number of
 random bytes. There are equivalent methods available via the OO interface.
 .
 Bytes::Random::Secure can be a drop-in replacement for Bytes::Random, with
 the primary enhancement of using a much higher quality random number
 generator to create the random data. The random_bytes function emulates the
 user interface of Bytes::Random's function by the same name. But with
 Bytes::Random::Secure the random number generator comes from
 Math::Random::ISAAC, and is suitable for cryptographic purposes. The harder
 problem to solve is how to seed the generator. This module uses
 Crypt::Random::Seed to generate the initial seeds for Math::Random::ISAAC.
Homepage: https://metacpan.org/release/Bytes-Random-Secure

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-6
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2121
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.41-12
Depends: libc6 (>> 2.41), libc6 (<< 2.42)
Recommends: manpages
Breaks: dh-lua (<< 27+nmu1~)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4738
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.41-12
Description: GNU C Library: localization files
 This package contains the translation files for the GNU C library and
 utility programs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13232
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.41-12
Replaces: libc6-amd64
Depends: libgcc-s1
Recommends: libidn2-0 (>= 2.0.5~)
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus
Breaks: base-files (<< 13.3~), chrony (<< 4.2-3~), dhcpcd (<< 1:10.1.0-7~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), libamdhip64-5 (<< 5.7.1-5+b1), libhiprtc-builtins5 (<< 5.7.1-5+b1), librccl1 (<< 5.4.3-3+b1), libswupdate0.1 (<< 2024.12.1+dfsg-1+b3), locales (<< 2.41), locales-all (<< 2.41), lua-swupdate (<< 2024.12.1+dfsg-1+b3), nscd (<< 2.41), pd-scaf (<< 1:0.14.1+darcs20180201-6+b4), postgresql-15-pllua (<< 1:2.0.12-4), postgresql-17-pllua (<< 1:2.0.12-3+b2), python3-iptables (<< 1.0.0-2), python3-mrgingham (<< 1.25-1), python3-onnxruntime (<< 1.20.1+dfsg-2~), sysvinit (<< 3.09-2~), sysvinit-core (<< 3.09-2~), tinydns (<< 1:1.05-14), uwsgi-plugin-pypy3 (<< 0.0.2+b1), valgrind (<< 1:3.19.0-1~)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1391
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cairo (1.18.4-1)
Version: 1.18.4-1+b1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.11.1), libpixman-1-0 (>= 0.40.0), libpng16-16t64 (>= 1.6.46), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Description: Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Homepage: https://cairographics.org/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.8.5-4)
Version: 0.8.5-4+b1
Depends: libc6 (>= 2.38)
Description: alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains dynamic libraries for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng

Package: libcap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap2 (1:2.75-10)
Version: 1:2.75-10+b1
Depends: libc6 (>= 2.38)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 132
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2 (1:2.75-10)
Version: 1:2.75-10+b1
Replaces: libcap-bin
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.63)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcbor0.10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcbor
Version: 0.10.2-2
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 478
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 4.68-1
Depends: perl:any, libhtml-parser-perl, liburi-perl
Recommends: libcgi-fast-perl
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Homepage: https://metacpan.org/release/CGI

Package: libclamav12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34334
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: clamav
Version: 1.4.3+dfsg-1
Replaces: libclamav12t64
Depends: libbz2-1.0, libc6 (>= 2.39), libcurl4t64 (>= 7.16.2), libgcc-s1 (>= 4.2), libjson-c5 (>= 0.15), libmspack0t64 (>= 0.4), libpcre2-8-0 (>= 10.22), libssl3t64 (>= 3.4.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.3.4)
Suggests: libclamunrar, libclamunrar11
Breaks: libclamav12t64 (<< 1.4.3+dfsg-1)
Description: anti-virus utility for Unix - library
 Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
 this software is the integration with mail servers (attachment
 scanning). The package provides a flexible and scalable
 multi-threaded daemon in the clamav-daemon package, a command-line
 scanner in the clamav package, and a tool for automatic updating via
 the Internet in the clamav-freshclam package. The programs are based
 on libclamav, which can be used by other software.
 .
 For programs written using the libclamav library. Libclamav may be used to add
 virus protection into software. The library is thread-safe, and automatically
 recognizes and scans archives. Scanning is very fast and most of the time
 not noticeable.
Homepage: https://www.clamav.net/

Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libclone-perl (0.47-1)
Version: 0.47-1+b1
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14)
Description: module for recursively copying Perl datatypes
 The Clone module provides a clone() method which makes recursive copies of
 nested hash, array, scalar and reference types, including tied variables and
 objects.
 .
 It is faster (although less flexible) than Storable's dclone. Its
 functionality is _not_ serializing in-memory objects (i.e. as
 Data::Dumper or YAML::Dump do), but deep-copying them over to new
 in-memory structures.
Homepage: https://metacpan.org/release/Clone

Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b3
Replaces: libcom-err2t64, libcomerr2 (<< 1.43.9-1~)
Provides: libcom-err2t64 (= 1.47.2-3+b3), libcomerr2 (= 1.47.2-3+b3)
Depends: libc6 (>= 2.38)
Breaks: libcom-err2t64 (<< 1.47.0-2.4~exp1~), libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: libcommon-sense-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 52
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcommon-sense-perl (3.75-3)
Version: 3.75-3+b5
Depends: perl (>= 5.40.1~), perlapi-5.40.1, perl (<< 5.40.2~)
Description: module that implements some sane defaults for Perl programs
 common::sense implements some sane defaults for Perl programs, as defined by
 two typical (or not so typical - use your common sense) specimens of Perl
 coders.
Homepage: https://metacpan.org/release/common-sense

Package: libcompress-bzip2-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 145
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libcompress-bzip2-perl (2.28-1)
Version: 2.28-1+b6
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libbz2-1.0, libc6 (>= 2.4)
Recommends: libcompress-raw-bzip2-perl (>= 2.094), libio-compress-perl (>= 2.094)
Description: Perl interface to Bzip2 compression library
 The Compress::Bzip2 module provides a Perl interface to the Bzip2
 compression library, a relevant subset of the functionality provided
 by Bzip2  is available in Compress::Bzip2.
 .
 The module can be split into two general areas of functionality, namely
 in-memory compression/decompression and read/write access to bzip2
 files.
Homepage: https://metacpan.org/release/Compress-Bzip2

Package: libconvert-asn1-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 158
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.34-1
Depends: perl:any, libmath-bigint-perl
Description: Perl module for encoding and decoding ASN.1 data structures
 Convert::ASN1 will parse ASN.1 descriptions and will encode from and decode to
 perl data structures using a hierarchy of references.
 .
 Note that the ASN.1 parser is not a complete implementation of the
 ASN.1 specification.
Homepage: https://metacpan.org/release/Convert-ASN1

Package: libconvert-binhex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 77
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.125-3
Depends: perl:any
Description: Perl5 module for extracting data from macintosh BinHex files
 Convert::BinHex is a format used by Macintosh for transporting Mac files safely
 through electronic mail, as short-lined, 7-bit, semi-compressed data
 streams. This module provides a means of converting those data streams
 back into binary data.
Homepage: https://metacpan.org/release/Convert-BinHex

Package: libcrypt-openssl-bignum-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 91
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libcrypt-openssl-bignum-perl (0.09-2)
Version: 0.09-2+b4
Depends: perl (>= 5.40.0-6), perl-openssl-abi-3, perlapi-5.40.0, libc6 (>= 2.4), libssl3t64 (>= 3.0.0)
Description: Perl module to access OpenSSL multiprecision integer arithmetic libraries
 Presently, many though not all of the arithmetic operations that OpenSSL
 provides are exposed to Perl via Crypt::OpenSSL::Bignum. In addition, this
 module can be used to provide access to bignum values produced by other
 OpenSSL modules, such as key parameters from Crypt::OpenSSL::RSA.
Homepage: http://perl-openssl.sourceforge.net/

Package: libcrypt-openssl-random-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 45
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcrypt-openssl-random-perl (0.17-1)
Version: 0.17-1+b1
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libssl3t64 (>= 3.0.0)
Description: module to access the OpenSSL pseudo-random number generator
 Crypt::OpenSSL::Random is a Perl module for accessing the OpenSSL
 pseudo-random number generator.
Homepage: https://perl-openssl.sourceforge.net/

Package: libcrypt-openssl-rsa-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 83
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 0.35-1.1
Depends: perl (>= 5.40.1-5), perl-openssl-abi-3, perlapi-5.40.1, libc6 (>= 2.4), libssl3t64 (>= 3.0.0), libcrypt-openssl-bignum-perl, libcrypt-openssl-random-perl
Description: module for RSA encryption using OpenSSL
 Crypt::OpenSSL::RSA is a Perl module that provides glue to the RSA functions
 in the OpenSSL library. It provides the following functionalities: create a
 key from a string, make a new key, save key to a string, save public portion
 of key to a string using format compatible with OpenSSL's command-line rsa
 tool, encrypt, decrypt, sign, verify, return the size in bytes of a key,
 check the validity of a key.
Homepage: https://metacpan.org/release/Crypt-OpenSSL-RSA

Package: libcrypt-random-seed-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 54
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.03-3
Depends: perl:any
Description: Perl module providing strong randomness for seeding
 Crypt::Random::Seed implements a simple mechanism to get strong
 randomness. The main purpose of this module is to provide a simple way
 to generate a seed for a PRNG such as Math::Random::ISAAC, for use in
 cryptographic key generation, or as the seed for an upstream module
 such as Bytes::Random::Secure. Flags for requiring non-blocking sources
 are allowed, as well as a very simple method for plugging in a source.
Homepage: https://metacpan.org/release/Crypt-Random-Seed

Package: libcrypt-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 144
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libcrypt-ssleay-perl (0.73.06-2)
Version: 0.73.06-2+b4
Depends: perl (>= 5.40.0-6), perl-openssl-abi-3, perlapi-5.40.0, libc6 (>= 2.4), libssl3t64 (>= 3.0.0), libbytes-random-secure-perl
Recommends: libio-socket-ip-perl
Description: OpenSSL support for LWP
 This perl module provides support for the HTTPS protocol under LWP, so
 that an LWP::UserAgent can make HTTPS GET & HEAD & POST requests. Please
 see perldoc LWP for more information on POST requests.
 .
 The Crypt::SSLeay package contains Net::SSL, which is automatically
 loaded by LWP::Protocol::https on HTTPS requests, and provides the
 necessary SSL glue for that module to work via these deprecated modules:
 Crypt::SSLeay::CTX, Crypt::SSLeay::Conn and Crypt::SSLeay::X509.
 .
 Work on Crypt::SSLeay has been continued only to provide HTTPS support
 for the LWP - libwww perl libraries. If you want access to the OpenSSL
 API via perl, check out Sampo's Net::SSLeay (available in Debian as
 the libnet-ssleay-perl package).
Homepage: https://metacpan.org/release/Crypt-SSLeay

Package: libcrypt1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 234
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.38-1
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.38)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
 libxcrypt is a modern library for one-way hashing of passwords.
 It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
 bcrypt-based password hashes
 It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
 as well as a set of extended interfaces like 'crypt_gensalt'.

Package: libcryptx-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1985
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.085-1
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.25), libmath-bigint-perl
Recommends: libjson-perl
Description: Perl module that provides a self-contained cryptographic toolkit
 CryptX is a self-contained cryptgraphico toolkit based on
 https://github.com/libtom/libtomcrypt. It provides cyphers, block cipher
 modes, authenticated encryption modes, hash functions, message authentication
 codes, public key cryptography, cryptographically secure random number
 generators, key derivation functions.
Homepage: https://metacpan.org/release/CryptX

Package: libcurl3t64-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 992
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.14.1-2
Replaces: libcurl3-gnutls
Provides: libcurl3-gnutls (= 8.14.1-2)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.6), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnettle8t64, libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libngtcp2-16 (>= 1.1.0), libngtcp2-crypto-gnutls8 (>= 1.1.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4)
Recommends: ca-certificates
Breaks: libcurl3-gnutls (<< 8.14.1-2)
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.se/

Package: libcurl4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1012
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.14.1-2
Replaces: libcurl3, libcurl4
Provides: libcurl4 (= 8.14.1-2)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libssl3t64 (>= 3.3.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4)
Recommends: ca-certificates
Breaks: libcurl4 (<< 8.14.1-2)
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.se/

Package: libdata-optlist-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.114-1
Depends: perl:any, libparams-util-perl, libsub-install-perl
Description: module to parse and validate simple name/value option pairs
 Data::OptList is a Perl module useful for working with simple name-and-value
 option pairs. It assumes any defined scalar is a name and any reference after
 it is its value.
Homepage: https://metacpan.org/release/Data-OptList

Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdatrie (0.2.13-3)
Version: 0.2.13-3+b1
Depends: libc6 (>= 2.14)
Description: Double-array trie library
 This package provides shared libraries needed to run programs that use the
 datrie library. It is usually automatically installed.
Homepage: https://linux.thai.net/projects/libthai

Package: libdb5.3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1854
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg2-9
Replaces: libdb5.3
Provides: libdb5.3 (= 5.3.28+dfsg2-9)
Depends: libc6 (>= 2.38)
Breaks: libdb5.3 (<< 5.3.28+dfsg2-9)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libdbd-pg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 570
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libdbd-pg-perl (3.18.0-1)
Version: 3.18.0-1+b3
Depends: perl (>= 5.40.0-6), perl-dbdabi-94, perlapi-5.40.0, libc6 (>= 2.38), libpq5 (>= 17~~), libdbi-perl, libversion-perl
Description: Perl DBI driver for the PostgreSQL database server
 DBD::Pg is a Perl DBI Database Driver module that works with the DBI module to
 provide access to PostgreSQL databases. It enables you to control a PostgreSQL
 database in a Perl script.
Homepage: https://metacpan.org/release/DBD-Pg

Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2531
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.647-1
Provides: dh-sequence-perl-dbi, perl-dbdabi-94
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.38)
Suggests: libclone-perl (>= 0.47), libmldbm-perl, libnet-daemon-perl, libsql-statement-perl
Description: Perl Database Interface (DBI)
 DBI (DataBase Interface) is a Perl framework that provides a common interface
 to access various backend databases in a uniform manner. DBD (DataBase Driver)
 modules provide implementations for various backend data storage mechanisms
 including networked relational databases (particularly SQL databases) and even
 web services such as the Google search engine.
 .
 It is extremely portable and available for a wide range of operating systems,
 architectures and data stores, including:
 .
  * Oracle
  * Microsoft SQL Server
  * IBM DB2
  * SQLite
  * PostgreSQL
  * Firebird
  * MySQL
Homepage: https://dbi.perl.org/

Package: libdbi1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdbi (0.9.0-6.1)
Version: 0.9.0-6.1+b1
Replaces: libdbi1
Provides: libdbi1 (= 0.9.0-6.1+b1)
Depends: libc6 (>= 2.38)
Breaks: libapache2-mod-log-sql-dbi (<= 1.100-11), libdbd-freetds (<< 0.9.0-2), libdbd-mysql (<< 0.9.0-2), libdbd-pgsql (<< 0.9.0-2), libdbd-sqlite (<< 0.9.0-2), libdbd-sqlite3 (<< 0.9.0-2), libdbi1 (<< 0.9.0-6.1)
Description: DB Independent Abstraction Layer for C -- shared library
 libdbi implements a database-independent abstraction layer in C, similar to
 the DBI/DBD layer in Perl. Writing one generic set of code, programmers can
 leverage the power of multiple databases and multiple simultaneous database
 connections by using this framework.
 .
 This package is the shared library.
Homepage: https://libdbi.sourceforge.net/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 445
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.16.2-2
Depends: libc6 (>= 2.38), libsystemd0
Recommends: dbus
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The message bus daemon can be found in the dbus-daemon package.
Homepage: https://dbus.freedesktop.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.280
Depends: libc6 (>= 2.38)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Deflate Team <libdeflate@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.23-2
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
Homepage: https://github.com/ebiggers/libdeflate

Package: libdevel-callchecker-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 56
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 0.009-2
Depends: libb-hooks-op-check-perl, libdynaloader-functions-perl, perl (>= 5.40.1-3), perlapi-5.40.1
Description: custom op checking attached to subroutines
 Devel::CallChecker makes some new features of the Perl 5.14.0 C API
 available to XS modules running on older versions of Perl.
 The features are centred around the function cv_set_call_checker,
 which allows XS code to attach a magical annotation
 to a Perl subroutine,
 resulting in resolvable calls to that subroutine
 being mutated at compile time by arbitrary C code.
 This module makes cv_set_call_checker
 and several supporting functions available.
 (It is possible to achieve the effect of cv_set_call_checker
 from XS code on much earlier Perl versions,
 but it is painful to achieve without the centralised facility.)
Homepage: https://metacpan.org/release/Devel-CallChecker

Package: libdevel-cycle-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.12-2
Depends: perl:any
Suggests: libpadwalker-perl
Description: Perl module to detect memory cycles in Perl objects
 Devel::Cycle is a developer's tool for finding memory cycles in Perl objects.
 Since Perl provides its automatic memory management using reference counting,
 cyclical/circular references will result in memory that will never be freed.
 Optionally, PadWalker (libpadwalker-perl) module enables reporting of cycles
 in code closures as well.
Homepage: https://metacpan.org/release/Devel-Cycle

Package: libdigest-hmac-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.05+dfsg-1
Depends: perl:any
Description: module for creating standard message integrity checks
 HMAC is used for message integrity checks between two parties
 that share a secret key, and works in combination with some other
 Digest algorithm, usually MD5 or SHA-1.  The HMAC mechanism
 is described in RFC 2104.
 .
 The Digest::HMAC module follow the common Digest:: interface,
 but the constructor takes the secret key and the name of some
 other simple Digest:: module as argument.
Homepage: https://metacpan.org/release/Digest-HMAC

Package: libdynaloader-functions-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.004-2
Depends: perl:any
Description: deconstructed dynamic C library loading
 DynaLoader::Functions provides a function-based interface
 to dynamic loading as used by Perl.
 Some details of dynamic loading are very platform-dependent,
 so correct use of these functions requires the programmer
 to be mindful of the space of platform variations.
Homepage: https://metacpan.org/release/DynaLoader-Functions

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 262
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20250104-1
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.38), libtinfo6 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/

Package: libelf1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1228
Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.192-4
Replaces: libelf1
Provides: libelf1 (= 0.192-4)
Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libelf1 (<< 0.192-4)
Description: library to read and write ELF files
 The libelf1t64 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: libemail-address-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 94
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libemail-address-xs-perl (1.05-1)
Version: 1.05-1+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14)
Description: Perl library for RFC 5322 address/group parsing and formatting
 Email::Address::XS implements RFC 5322 parser and formatter of email
 addresses and groups. It parses an input string from email headers which
 contain a list of email addresses or a groups of email addresses (like From,
 To, Cc, Bcc, Reply-To, Sender, ...). Also it can generate a string value for
 those headers from a list of email addresses objects.
 .
 Parser and formatter functionality is implemented in XS and uses shared code
 from Dovecot IMAP server.
 .
 It is a drop-in replacement for the Email::Address module.
Homepage: https://metacpan.org/release/Email-Address-XS

Package: libencode-detect-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 192
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libencode-detect-perl (1.01-6)
Version: 1.01-6+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Description: Encode::Encoding subclass that detects the encoding of data
 Encode::Detect provides an interface to Mozilla's universal charset
 detector, which detects the charset used to encode data.
Homepage: https://metacpan.org/release/Encode-Detect

Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.05-3
Depends: perl:any
Description: utility to determine the locale encoding
 In many applications it's wise to let Perl use Unicode for the strings it
 processes. Most of the interfaces Perl has to the outside world are still byte
 based. Programs therefore need to decode byte strings that enter the program
 from the outside and encode them again on the way out.
 .
 The POSIX locale system is used to specify both the language conventions
 requested by the user and the preferred character set to consume and output.
 The Encode::Locale module looks up the charset and encoding (called a CODESET
 in the locale jargon) and arranges for the Encode module to know this encoding
 under the name "locale". It means bytes obtained from the environment can be
 converted to Unicode strings by calling Encode::encode(locale => $bytes) and
 converted back again with Encode::decode(locale => $string).
Homepage: https://metacpan.org/release/Encode-Locale

Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.17030-1
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
 The Error module provides two interfaces.  Firstly "Error" provides a
 procedural interface to exception handling. Secondly "Error" is a base class
 for errors/exceptions that can either be thrown, for subsequent catch, or can
 simply be recorded.
 .
 Errors in the class "Error" should not be thrown directly, but the user
 should throw errors from a sub-class of "Error".
 .
 Warning: Using the "Error" module is no longer recommended due to the
 black-magical nature of its syntactic sugar, which often tends to break. Its
 maintainers have stopped actively writing code that uses it, and discourage
 people from doing so.
 .
 Recommended alternatives are Exception::Class (libexception-class-perl),
 Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
 (libtry-tiny-perl).
Homepage: https://metacpan.org/release/Error

Package: libestr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libestr
Version: 0.1.11-2
Depends: libc6 (>= 2.14)
Description: Helper functions for handling strings (lib)
 The 'libestr' library contains some essential string manipulation
 functions and more, like escaping special characters.
 .
 This package contains the shared library.
Homepage: https://libestr.adiscon.com/

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 400
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.7.1-2
Pre-Depends: libc6 (>= 2.38)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/

Package: libext2fs2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 557
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b3
Replaces: e2fslibs (<< 1.43.9-1~), libext2fs2
Provides: e2fslibs (= 1.47.2-3+b3), libext2fs2 (= 1.47.2-3+b3)
Depends: libc6 (>= 2.38)
Breaks: e2fslibs (<< 1.43.9-1~), libext2fs2 (<< 1.47.2-3)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: libfastjson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 1.2304.0-2
Depends: libc6 (>= 2.38)
Description: fast json library for C
 The libfastjson library is a fork from json-c with a focus on performance.
 .
 This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 584
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Depends: libblkid1 (= 2.41-5), libc6 (>= 2.38), libuuid1 (= 2.41-5)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://github.com/util-linux/util-linux

Package: libffi8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.8-2
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.8-2)
Depends: libc6 (>= 2.34)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/

Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Debian Authentication Maintainers <pkg-auth-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfido2 (1.15.0-1)
Version: 1.15.0-1+b1
Depends: libc6 (>= 2.38), libcbor0.10 (>= 0.10.2), libssl3t64 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Description: library for generating and verifying FIDO 2.0 objects
 A library for communicating with a FIDO device over USB or NFC, and for
 verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO
 2.0 (CTAP 2) are supported.
 .
 This package contains the library.
Homepage: https://developers.yubico.com/libfido2/

Package: libfile-listing-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.16-1
Depends: perl:any, libhttp-date-perl
Description: module to parse directory listings
 File::Listing exports a single function called parse_dir(), which can be used
 to parse directory listings.
 .
 The first parameter to parse_dir() is the directory listing to parse. It can
 be a scalar, a reference to an array of directory lines or a glob
 representing a filehandle to read the directory listing from.
 .
 The second parameter is the time zone to use when parsing time stamps in the
 listing. If this value is undefined, then the local time zone is assumed.
 .
 The third parameter is the type of listing to assume. Currently supported
 formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'.
Homepage: https://metacpan.org/release/File-Listing

Package: libfile-readbackwards-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.06-2
Depends: perl:any
Description: Perl module for reading a file backwards by lines
 File::ReadBackwards reads a file backwards line by line. It is simple to use,
 memory efficient and fast. It supports both an object and a tied handle
 interface.
 .
 It is intended for processing log and other similar text files which
 typically have their newest entries appended to them. By default files
 are assumed to be plain text and have a line ending appropriate to the
 OS. But you can set the input record separator string on a per file
 basis.
Homepage: https://metacpan.org/release/File-ReadBackwards

Package: libfile-sync-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 44
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libfile-sync-perl (0.11-3)
Version: 0.11-3+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.3)
Description: Perl interface to sync() and fsync()
 File::Sync provides Perl interfaces to the Unix sync(2) and POSIX.1b fsync(2)
 system calls. The fsync() call is needed for putting messages into qmail
 maildirs, and sync() is included for completeness.
Homepage: https://metacpan.org/release/File-Sync

Package: libfilesys-df-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 51
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libfilesys-df-perl (0.92-7)
Version: 0.92-7+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4)
Description: Module to obtain filesystem disk space information
 This module provides a way to obtain filesystem disk space
 information. This is a Unix only distribution. If you want to gather
 this information for Unix and Windows, use Filesys::DfPortable.  The
 only major benefit of using Filesys::Df over Filesys::DfPortable, is
 that Filesys::Df supports the use of open filehandles as arguments.
Homepage: https://metacpan.org/release/Filesys-Df

Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 592
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.15.0-2.3
Provides: libfontconfig
Depends: libc6 (>= 2.38), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.15.0-2.3)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 962
Maintainer: Hugh McMaster <hmc@debian.org>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.13.3+dfsg-1
Depends: libbrotli1 (>= 0.6.0), libbz2-1.0, libc6 (>= 2.33), libpng16-16t64 (>= 1.6.2), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
Homepage: https://freetype.org

Package: libfribidi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Debian Hebrew Packaging Team <team+hebrew@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.16-1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
 FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
 languages.
 This package contains the shared libraries.
Homepage: http://www.fribidi.org/

Package: libfuse3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 325
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.17.2-3
Depends: libc6 (>= 2.38)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libgcc-s1
Protected: yes
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:14.2.0-19)
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.35)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Important: yes

Package: libgcrypt20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1999
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.11.0-7
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.50)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://gnupg.org/software/libgcrypt/

Package: libgdbm-compat4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.24-2
Replaces: libgdbm-compat4
Provides: libgdbm-compat4 (= 1.24-2)
Depends: libc6 (>= 2.33), libgdbm6t64 (>= 1.16)
Breaks: libgdbm-compat4 (<< 1.24-2)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm6t64 and libgdbm-dev.
Homepage: https://gnu.org/software/gdbm

Package: libgdbm6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.24-2
Replaces: libgdbm6
Provides: libgdbm6 (= 1.24-2)
Depends: libc6 (>= 2.34)
Suggests: gdbm-l10n (= 1.24-2)
Breaks: libgdbm6 (<< 1.24-2)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: https://gnu.org/software/gdbm

Package: libgeo-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 283
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libgeo-ip-perl (1.51-4)
Version: 1.51-4+b4
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.3), libgeoip1t64 (>= 1.6.12)
Recommends: geoip-database
Description: Perl interface to GeoIP library
 Geo::IP is a Perl external module which provides an interface to
 GeoIP library.
 .
 GeoIP is a C library that enables the user to find the country that any
 IP address or hostname originates from.  It uses a file based database
 that simply contains IP blocks as keys, and countries as values.
 This database is managed by the GeoIP library package.
Homepage: https://metacpan.org/release/Geo-IP

Package: libgeoip1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 279
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Architecture: amd64
Multi-Arch: same
Source: geoip (1.6.12-11.1)
Version: 1.6.12-11.1+b1
Replaces: libgeoip1
Provides: libgeoip1 (= 1.6.12-11.1+b1)
Depends: libc6 (>= 2.33)
Recommends: geoip-database
Suggests: geoip-bin
Breaks: libgeoip1 (<< 1.6.12-11.1)
Description: non-DNS IP-to-country resolver library
 GeoIP is a C library that enables the user to find the country that any
 IP address or hostname originates from. It uses a file based database.
 .
 This database simply contains IP blocks as keys, and countries as values and
 it should be more complete and accurate than using reverse DNS lookups.
 .
 This package contains the shared library.
Homepage: https://www.maxmind.com/

Package: libgetopt-long-descriptive-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 78
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.116-2
Depends: perl:any, libio-stringy-perl, libparams-validate-perl, libsub-exporter-perl, perl (>= 5.39.5)
Breaks: libmoosex-getopt-perl (<< 0.77), libmousex-getopt-perl (<< 0.38-4~)
Description: module that handles command-line arguments with usage text
 Getopt::Long::Descriptive is a convenience wrapper for Getopt::Long, which
 allows one to easily define options in the same familiar way, while also
 supporting custom descriptions for program usage output.
Homepage: https://metacpan.org/release/Getopt-Long-Descriptive

Package: libgif7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: David Suárez <deiv@debian.org>
Architecture: amd64
Multi-Arch: same
Source: giflib (5.2.2-1)
Version: 5.2.2-1+b1
Depends: libc6 (>= 2.14)
Description: library for GIF images (library)
 GIFLIB is a package of portable tools and library routines for working with
 GIF images.
 .
 This package contains the library.
Homepage: https://giflib.sourceforge.net/

Package: libglib2.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4447
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.84.4-3~deb13u1
Replaces: libglib2.0-0 (<< 2.80.0-7~)
Provides: libgio-2.0-0 (= 2.84.4-3~deb13u1), libglib-2.0-0 (= 2.84.4-3~deb13u1), libglib2.0-0 (= 2.84.4-3~deb13u1), libgmodule-2.0-0 (= 2.84.4-3~deb13u1), libgobject-2.0-0 (= 2.84.4-3~deb13u1), libgthread-2.0-0 (= 2.84.4-3~deb13u1)
Depends: libatomic1 (>= 4.8), libc6 (>= 2.38), libffi8 (>= 3.4), libmount1 (>= 2.40~rc2), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Suggests: low-memory-monitor
Breaks: glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 44.9-2~), libedataserver-1.2-26 (<< 3.44.3-2~), libgladeui-2-6 (<< 3.22.2), libglib2.0-0 (<< 2.80.0-7~), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://gitlab.gnome.org/GNOME/glib

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 882
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-3
Depends: libc6 (>= 2.38)
Breaks: postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: https://gmplib.org/

Package: libgnutls30t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3495
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.8.9-3
Replaces: libgnutls30
Provides: libgnutls30 (= 3.8.9-3)
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64 (>= 3.10), libidn2-0 (>= 2.0.0), libnettle8t64 (>= 3.10), libp11-kit0 (>= 0.25.1), libtasn1-6 (>= 4.14), libunistring5 (>= 1.1)
Suggests: gnutls-bin
Breaks: libgnutls30 (<< 3.8.9-3)
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.
Homepage: https://www.gnutls.org/

Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 368
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/

Package: libgpg-error0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.51-4
Depends: libc6 (>= 2.38)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libgpgme11t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 593
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gpgme1.0
Version: 1.24.2-3
Replaces: libgpgme11
Provides: libgpgme11 (= 1.24.2-3)
Depends: gnupg (>= 2.1.21-4) | gpg, libassuan9 (>= 2.4.2), libc6 (>= 2.38), libgpg-error0 (>= 1.50)
Recommends: dirmngr, gpg-agent, gpg-wks-client, gpgsm
Breaks: libgpgme11 (<< 1.24.2-3)
Description: GPGME - GnuPG Made Easy (library)
 GPGME is a wrapper library which provides a C API to access some of the
 GnuPG functions, such as encrypt, decrypt, sign, verify, ...
 .
 This package contains the library.
Homepage: https://gnupg.org/software/gpgme/

Package: libgpgmepp6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 690
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gpgme1.0
Version: 1.24.2-3
Replaces: libgpgmepp6
Provides: libgpgmepp6 (= 1.24.2-3)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgpgme11t64 (>= 1.24.1), libstdc++6 (>= 13.1)
Breaks: libgpgmepp6 (<< 1.24.2-3)
Description: C++ wrapper library for GPGME
 GpgME++ (aka GpgMEpp) is a C++ wrapper (or C++ bindings) for the
 GnuPG project's GPGME (GnuPG Made Easy) library.
 .
 This is the official upstream C++ binding for GPGME.
Homepage: https://gnupg.org/software/gpgme/

Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: graphite2 (1.3.14-2)
Version: 1.3.14-2+b1
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Homepage: https://graphite.sil.org/

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 434
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5
Depends: libkrb5-3 (= 1.21.3-5), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5support0 (= 1.21.3-5)
Suggests: krb5-doc, krb5-user
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1347
Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz (10.2.0-1)
Version: 10.2.0-1+b1
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.38), libfreetype6 (>= 2.11.1), libglib2.0-0t64 (>= 2.32.0), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the shared libraries.
Homepage: https://harfbuzz.github.io/

Package: libhogweed6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 483
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.10.1-1
Replaces: libhogweed6
Provides: libhogweed6 (= 3.10.1-1)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg), libnettle8t64
Breaks: libhogweed6 (<< 3.10.1-1)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: https://www.lysator.liu.se/~nisse/nettle/

Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 230
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libhtml-parser-perl (3.83-1)
Version: 3.83-1+b2
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.4), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
 HTML::Parser is a collection of modules useful for handling HTML documents.
 These modules used to be part of the libwww-perl distribution, but are now
 unbundled in order to facilitate a separate development track.
 .
 Objects of the HTML::Parser class will recognize markup and separate it from
 content data. As different kinds of markup are recognized, the corresponding
 event handler is invoked. The document to be parsed may also be supplied in
 arbitrary chunks, making on-the-fly parsing of network documents possible.
Homepage: https://metacpan.org/release/HTML-Parser

Package: libhtml-scrubber-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 45
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.19-2
Depends: perl:any, libhtml-parser-perl
Description: Perl extension for scrubbing/sanitizing html
 If you want to "scrub" or "sanitize" html input in a reliable and
 flexible fashion, then HTML::Scrubber is for you.
 .
 The author was not satisfied with HTML::Sanitizer because it is based
 on HTML::TreeBuilder, so he wrote something similar that works
 directly with HTML::Parser.
Homepage: https://metacpan.org/release/HTML-Scrubber

Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.24-1
Depends: perl:any
Description: data tables pertaining to HTML
 HTML::Tagset contains data tables useful in dealing with HTML.  For instance,
 it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
 which cannot have content.  It provides no functions or methods.
Homepage: https://metacpan.org/release/HTML-Tagset

Package: libhtml-tree-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 491
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.07-3
Depends: perl:any, libhtml-parser-perl, libhtml-tagset-perl
Recommends: libhtml-format-perl, libwww-perl
Description: Perl module to represent and create HTML syntax trees
 HTML::Tree is a collection of modules that represent, create and extract
 information from HTML syntax trees.  These modules used to be part of
 the libwww-perl distribution, but are now unbundled in order to
 facilitate a separate development track.
Homepage: https://metacpan.org/release/HTML-Tree

Package: libhttp-cookies-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 51
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.11-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl
Description: HTTP cookie jars
 This class is for objects that represent a "cookie jar" -- that is, a
 database of all the HTTP cookies that a given LWP::UserAgent object knows
 about.
 .
 Cookies are a general mechanism which server side connections can use to both
 store and retrieve information on the client side of the connection. For more
 information about cookies refer to
 <URL:http://curl.haxx.se/rfc/cookie_spec.html> and
 <URL:http://www.cookiecentral.com/>. HTTP::Cookies also implements the new
 style cookies described in RFC 2965. The two variants of cookies are supposed
 to be able to coexist happily.
 .
 Instances of the class HTTP::Cookies are able to store a collection of
 Set-Cookie2: and Set-Cookie: headers and are able to use this information to
 initialize Cookie-headers in HTTP::Request objects. The state of a
 HTTP::Cookies object can be saved in and restored from files.
Homepage: https://metacpan.org/release/HTTP-Cookies

Package: libhttp-daemon-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.16-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl, libio-socket-ip-perl, liblwp-mediatypes-perl, libsocket-perl
Description: simple http server class
 Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen on a
 socket for incoming requests. The HTTP::Daemon is a subclass of
 IO::Socket::IP, so you can perform socket operations directly on it too.
 .
 The accept() method will return when a connection from a client is available.
 The returned value will be an HTTP::Daemon::ClientConn object which is
 another IO::Socket::IP subclass. Calling the get_request() method on this
 object will read data from the client and return an HTTP::Request object. The
 ClientConn object also provide methods to send back various responses.
 .
 This HTTP daemon does not fork(2) for you. Your application, i.e. the user of
 the HTTP::Daemon is responsible for forking if that is desirable. Also note
 that the user is responsible for generating responses that conform to the
 HTTP/1.1 protocol.
Homepage: https://metacpan.org/release/HTTP-Daemon

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 30
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.06-1
Depends: perl:any, libtime-local-perl (>= 1.28), libtimedate-perl
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Homepage: https://metacpan.org/release/HTTP-Date

Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 200
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 7.00-2
Depends: perl:any, libclone-perl (>= 0.46), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libencode-locale-perl, libencode-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Recommends: libio-compress-brotli-perl
Breaks: libhtml-form-perl (<< 6.11-2~)
Description: perl interface to HTTP style messages
 The HTTP::Message distribution contains classes useful for representing the
 messages passed in HTTP style communication. These are classes representing
 requests, responses and the headers contained within them.
 .
 The HTTP::Headers class encapsulates HTTP-style message headers. The headers
 consist of attribute-value pairs also called fields, which may be repeated,
 and which are printed in a particular order. The field names are cases
 insensitive.
 .
 Instances of this class are usually created as member variables of the
 HTTP::Request and HTTP::Response classes, internal to the library.
Homepage: https://metacpan.org/release/HTTP-Message

Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 36
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.01-2
Depends: perl:any, libhttp-message-perl
Description: implementation of content negotiation
 HTTP::Negotiate provides a complete implementation of the HTTP content
 negotiation algorithm. Content negotiation allows for the selection of a
 preferred content representation based upon attributes of the negotiable
 variants and the value of the various Accept* header fields in the request.
Homepage: https://metacpan.org/release/HTTP-Negotiate

Package: libicu76
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37371
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 76.1-4
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 14)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: https://icu.unicode.org/

Package: libidn2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 446
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.8-2
Depends: libc6 (>= 2.14), libunistring5 (>= 1.1)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2

Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.004-3
Depends: perl:any
Description: open an HTML file with automatic charset detection
 IO::HTML provides an easy way to open a file containing HTML while
 automatically determining its encoding.  It uses the HTML5 encoding
 sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Homepage: https://metacpan.org/release/IO-HTML

Package: libio-multiplex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 58
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.16-3
Depends: perl:any
Description: object-oriented interface to select() for Perl
 IO::Multiplex is designed to take the effort out of managing
 multiple file handles.  It is essentially a really fancy front end to
 the select() system call.  In addition to maintaining the select()
 loop, it buffers all input and output to/from the file handles.  It
 can also accept incoming connections on one or more listen sockets.
Homepage: https://metacpan.org/release/IO-Multiplex

Package: libio-pty-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 104
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libio-pty-perl (1:1.20-1)
Version: 1:1.20-1+b3
Provides: libio-tty-perl
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.38)
Description: Perl module for pseudo tty IO
 IO::Pty provides an interface to allow the creation of a pseudo tty.
 .
 IO::Pty inherits from IO::Handle and so provide all the methods
 defined by the IO::Handle package.
 .
 Please note that pty creation is very system-dependent. If you have
 problems, see IO::Tty for help.
Homepage: https://metacpan.org/release/IO-Tty

Package: libio-socket-inet6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 44
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.73-1
Depends: perl:any, libsocket6-perl
Description: object interface for AF_INET6 domain sockets
 IO::Socket::INET6 provides an object interface to create and use sockets
 in the AF_INET6 domain. It is built upon the IO::Socket interface and
 inherits all the methods defined by IO::Socket.
 .
 Please note that IO-Socket-INET6 is considered deprecated. It was succeeded
 by IO::Socket::IP. Please consider converting old code from IO-Socket-INET6
 to IO-Socket-IP.
Homepage: https://metacpan.org/release/IO-Socket-INET6

Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 678
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.089-1
Depends: perl:any, libnet-ssleay-perl, netbase
Recommends: libio-socket-ip-perl | libio-socket-inet6-perl, libsocket-perl | libsocket6-perl, liburi-perl | libnet-libidn-perl | libnet-idn-encode-perl
Suggests: ca-certificates
Description: Perl module implementing object oriented interface to SSL sockets
 This module is a true drop-in replacement for IO::Socket::INET that
 uses SSL to encrypt data before it is transferred to a remote server
 or client.  IO::Socket::SSL supports all the extra features that one
 needs to write a full-featured SSL client or server application:
 multiple SSL contexts, cipher selection, certificate verification, and
 SSL version selection.  As an extra bonus, it works perfectly with
 mod_perl.
 .
 IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
 libio-socket-inet6-perl is installed.
Homepage: https://metacpan.org/release/IO-Socket-SSL

Package: libio-stringy-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 124
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.113-2
Depends: perl:any
Description: modules for I/O on in-core objects (strings/arrays)
 IO::Stringy primarily provides modules for performing both traditional and
 object-oriented I/O on things *other* than normal filehandles; in particular,
 IO::Scalar, IO::ScalarArray, and IO::Lines.
 .
 The libio-stringy-perl package provides the following modules:
 .
  * IO::AtomicFile  - write a file which is updated atomically
  * IO::InnerFile   - define a file inside another file
  * IO::Lines       - IO:: interface for reading/writing an array of lines
  * IO::Scalar      - IO:: interface for reading/writing a scalar
  * IO::ScalarArray - IO:: interface for reading/writing an array of scalars
  * IO::Stringy     - I/O on in-core objects like strings and arrays
  * IO::Wrap        - wrap raw filehandles in IO::Handle interface
  * IO::WrapTie     - wrap tieable objects in IO::Handle interface
Homepage: https://metacpan.org/release/IO-Stringy

Package: libipc-run-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 267
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20231003.0-2
Depends: perl:any, libio-pty-perl
Description: Perl module for running processes
 IPC::Run allows you to run and interact with child processes using
 files, pipes, and pseudo-ttys.  Both system()-style and scripted
 usages are supported and may be mixed.  Likewise, functional and OO
 API styles are both supported and may be mixed.
 .
 Various redirection operators reminiscent of those seen on common
 Unix and DOS command lines are provided.
Homepage: https://metacpan.org/release/IPC-Run

Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: jansson (2.14-2)
Version: 2.14-2+b3
Depends: libc6 (>= 2.38)
Description: C library for encoding, decoding and manipulating JSON data
 Jansson is a C library for encoding, decoding and manipulating JSON data.
 .
 It features:
  * Simple and intuitive API and data model
  * Comprehensive documentation
  * No dependencies on other libraries
  * Full Unicode support (UTF-8)
  * Extensive test suite
Homepage: http://www.digip.org/jansson/

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit (2.1-6.1)
Version: 2.1-6.1+b2
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/

Package: libjpeg62-turbo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 694
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-4
Replaces: libjpeg62
Provides: libjpeg62 (= 1:2.1.5-4)
Depends: libc6 (>= 2.14)
Conflicts: libjpeg62
Description: libjpeg-turbo JPEG runtime library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the shared runtime library.
Homepage: https://www.libjpeg-turbo.org/

Package: libjs-bootstrap5
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 5939
Maintainer: Daniel Baumann <daniel@debian.org>
Architecture: all
Multi-Arch: foreign
Source: bootstrap-html
Version: 5.3.5+dfsg-4
Depends: node-popper2
Suggests: bootstrap-icons, libjs-bootstrap5-doc
Description: HTML front-end framework (version 5)
 Bootstrap is a CSS framework directed at responsive, mobile-first front-end
 web development. It contains HTML, CSS and (optionally) JavaScript-based design
 templates for typography, forms, buttons, navigation, and other interface
 components.
 .
 This package contains bootstrap version 5.
Homepage: https://getbootstrap.com

Package: libjs-extjs
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 22516
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 7.0.0-5
Breaks: proxmox-widget-toolkit (<< 3.1-1)
Description: cross-browser JavaScript library
 Ext JS is a cross-browser JavaScript library for building rich internet
 applications.
Homepage: https://www.sencha.com/

Package: libjs-qrcodejs
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 31
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 1.20230525-pve1
Description: Cross-Browser JavaScript library for making QRCodes
 Cross-Browser QRCode generator supporting HTML5 Canvas and table tags.
Homepage: https://davidshimjs.github.io/qrcodejs/

Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.18+ds-1
Depends: libc6 (>= 2.38)
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki

Package: libjson-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 244
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.10000-1
Depends: perl:any
Recommends: libjson-xs-perl
Description: module for manipulating JSON-formatted data
 JSON is a Perl module for manipulating data stored in the format of the same
 name. JavaScript Object Notation (JSON) is a simple data serialization format
 (defined in RFC 4627) that serves as an alternative to XML.
 .
 The primary purpose of this module is to select an appropriate backend JSON
 implementation. It prefers either JSON::XS (see libjson-xs-perl) or JSON::PP
 (see libjson-pp-perl), but will fall back on a backport implementation if
 neither are available.
Homepage: https://metacpan.org/release/JSON

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 266
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5
Depends: libc6 (>= 2.38), libkrb5support0 (= 1.21.3-5)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.3-6
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git

Package: libkmod2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 34.2-2
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1074
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5
Depends: libkrb5support0 (= 1.21.3-5), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5
Depends: libc6 (>= 2.38)
Breaks: krb5-admin-server (<< 1.20.1-4~), krb5-kdc (<< 1.20.1-4~), krb5-pkinit (<< 1.20.1-4~), krb5-user (<< 1.20.1-4~), libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20.1-4~), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit12 (<< 1.20.1-4~), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-10t64 (<< 1.20.1-4~), libkdb5-8 (<< 1.16), libkrb5-3 (<< 1.20.1-4~)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: https://web.mit.edu/kerberos/

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 330
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libksba (1.6.7-2)
Version: 1.6.7-2+b1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.46)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/

Package: liblastlog2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Depends: libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Description: lastlog2 database shared library
 Y2038 safe lastlog database implementation, library files.
Homepage: https://github.com/util-linux/util-linux

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 450
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.16-2
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/

Package: libldap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 576
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.6.10+dfsg-1
Depends: libc6 (>= 2.38), libsasl2-2 (>= 2.1.28+dfsg1), libssl3t64 (>= 3.0.0)
Recommends: libldap-common
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/

Package: libleptonica6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2891
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: leptonlib
Version: 1.84.1-4
Replaces: libleptonica (>= 1.69~)
Depends: libc6 (>= 2.33), libgif7 (>= 5.1), libjpeg62-turbo (>= 1.3.1), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.2), libtiff6 (>= 4.0.3), libwebp7 (>= 1.4.0), libwebpmux3 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Breaks: libleptonica (>= 1.69~)
Description: image processing library
 Well-tested C library for some basic image processing operations,
 along with a description of the functions and some design methods. A
 full set of affine transformations (translation, shear, rotation,
 scaling) on images of all depths is included, with the exception that
 some of the scaling methods do not work at all depths. There are also
 implementations of binary morphology, grayscale morphology,
 convolution and rank order filters, and applications such as jbig2
 image processing and color quantization. You will also find basic
 utilities for the safe and efficient handling of arrays (of strings,
 numbers, number pairs and image-related geometrical objects), byte
 queues, generic stacks, generic lists, and endian-independent
 indexing into 32-bit arrays.
Homepage: http://www.leptonica.org

Package: liblerc4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 603
Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-5
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: Limited Error Raster Compression library
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
Homepage: https://github.com/Esri/lerc

Package: liblinux-inotify2-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 58
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: amd64
Source: liblinux-inotify2-perl (1:2.3-2)
Version: 1:2.3-2+b3
Depends: libcommon-sense-perl, perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.28)
Suggests: iwatch
Description: scalable directory and file change notification
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 This module implements an interface to the Linux 2.6.13 and later inotify
 directory and file change notification system.
 .
 It has a number of advantages over the Linux::Inotify module:
   - It is portable (Linux::Inotify only works on x86).
   - The equivalent of fullname works correctly.
   - It is better documented.
   - It has callback-style interface, which is better suited for integration.
 .
 This package provides the Perl module Linux::Inotify2.
Homepage: http://software.schmorp.de/pkg/Linux-Inotify2.html

Package: libllvm19
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126696
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-19 (1:19.1.7-3)
Version: 1:19.1.7-3+b1
Replaces: llvm-19-dev (<< 1:19.1.0~++rc3-1~exp2)
Depends: libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 4.3), libstdc++6 (>= 12), libxml2 (>= 2.7.4), libz3-4 (>= 4.13.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0)
Breaks: llvm-19-dev (<< 1:19.1.0~++rc3-1~exp2)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 53
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.07-7)
Version: 1.07-7+b1
Depends: libc6 (>= 2.3)
Pre-Depends: perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/Locale-gettext

Package: liblockfile-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 55
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.208-1.1
Depends: perl:any, liblog-agent-perl
Description: Perl module for simple advisory file locking
 The LockFile::Simple extension provides simple file locking, of
 the advisory kind, i.e. it requires cooperation between applications
 wishing to lock the same files.
 .
 It is meant to be used in quick-and-dirty scripts or more elaborated
 programs that want a simple locking scheme, yet with a reasonable
 level of configuration.
Homepage: http://search.cpan.org/dist/LockFile-Simple/

Package: liblog-agent-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 305
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.005-2
Depends: perl:any
Recommends: libmailtools-perl
Description: Perl module providing helper logging routines
 Log::Agent is a general logging framework aimed at reusable modules
 that allow code to be written that is independent of the final logging
 method to be used.
Homepage: https://metacpan.org/release/Log-Agent

Package: liblognorm5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblognorm
Version: 2.0.6-5
Depends: libc6 (>= 2.38), libestr0 (>= 0.1.0), libfastjson4 (>= 0.99.3)
Description: log normalizing library
 Liblognorm is an event and log normalization library that is capable of
 real-time processing. It provides the capability to normalize events to
 a set of standard formats.
 .
 This package contains the shared library.
Homepage: https://www.liblognorm.com/

Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.04-2
Depends: perl:any
Description: module to guess media type for a file or a URL
 LWP::MediaTypes provides functions for handling media (also known as MIME)
 types and encodings. The mapping from file extensions to media types is
 defined by the media.types file. If the ~/.media.types file exists it is used
 instead. For backwards compatibility it will also look for ~/.mime.types.
Homepage: https://metacpan.org/release/LWP-MediaTypes

Package: liblwp-protocol-https-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 26
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.14-1
Depends: perl:any, ca-certificates, libio-socket-ssl-perl, libnet-http-perl, libwww-perl
Suggests: libcrypt-ssleay-perl
Description: HTTPS driver for LWP::UserAgent
 The LWP::Protocol::https module provides support for using HTTPS schemed URLs
 with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so
 you don't use it directly. Once the module is installed LWP is able to access
 sites using HTTP over SSL/TLS.
 .
 If hostname verification is requested by LWP::UserAgent's ssl_opts, and
 neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be
 the one provided by ca-certificates.
 .
 This module used to be bundled with libwww-perl, but it was unbundled in
 v6.02 in order to be able to declare its dependencies properly for the CPAN
 tool-chain. Applications that need HTTPS support can just declare their
 dependency on LWP::Protocol::https and will no longer need to know what
 underlying modules to install.
Homepage: https://metacpan.org/release/LWP-Protocol-https

Package: liblz4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.10.0-4
Replaces: liblz4-1a
Depends: libc6 (>= 2.14), libxxhash0 (>= 0.6.5)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/lz4/lz4

Package: liblzma5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 435
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.8.1-1
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/

Package: libmail-authenticationresults-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 133
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.20231031-1
Depends: perl:any, libclone-perl, libjson-perl, libscalar-list-utils-perl
Description: object oriented Authentication-Results headers
 Mail::AuthenticationResults provides a parser which copes with most styles of
 Authentication-Results header seen in the wild, but is not yet fully RFC7601
 compliant
 .
 Differences from RFC7601
 .
 key/value pairs are parsed when present in the authserv-id section, this is
 against RFC but has been seen in headers added by Yahoo!.
 .
 Comments added between key/value pairs will be added after them in the data
 structures and when stringified.
Homepage: https://metacpan.org/release/Mail-AuthenticationResults

Package: libmail-dkim-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 467
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.20240923-1
Depends: perl:any, libcrypt-openssl-rsa-perl, libcryptx-perl, libdigest-sha-perl, liberror-perl, libgetopt-long-descriptive-perl, libmail-authenticationresults-perl, libmailtools-perl, libnet-dns-perl
Description: module to cryptographically identify the sender of email
 RFC 4871, DomainKeys Identified Mail (DKIM), defines a domain-level
 authentication framework for email using public-key cryptography and
 key server technology to permit verification of the source and
 contents of messages by either Mail Transport Agents (MTAs) or Mail
 User Agents (MUAs).
 .
 Mail::DKIM is a Perl implementation created by Jason Long of Messiah
 College. It performs signing as well as signature verification. It
 also supports the older DomainKeys standard.
 .
 This library further includes support for adding and verifying
 Authenticated Received Chain (ARC; RFC 8617) assertions.
Homepage: https://dkimproxy.sourceforge.net

Package: libmail-spf-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 293
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Source: mail-spf-perl
Version: 3.20250505-1
Depends: perl:any, liberror-perl, libnet-dns-perl, libnetaddr-ip-perl, liburi-perl
Description: Perl implementation of Sender Policy Framework and Sender ID
 Mail::SPF is an object-oriented Perl implementation of the Sender Policy
 Framework (SPF) e-mail sender authentication system <http://www.openspf.org>.
 .
 It supports both the TXT and SPF RR types as well as both SPFv1 (v=spf1) and
 Sender ID (spf2.0) records, and it is fully compliant to RFCs 4408 and 4406.
 (It does not however implement the patented PRA address selection algorithm
 described in RFC 4407.)
Homepage: https://metacpan.org/release/Mail-SPF

Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 229
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.22-1
Depends: perl:any, libnet-perl, libnet-smtp-ssl-perl, libtest-simple-perl, libtimedate-perl
Description: modules to manipulate email in perl programs
 MailTools is a set of perl modules which provide an easy interface to
 manipulating email in an object-oriented fashion.
 .
  Mail::Address - Parse mail addresses
  Mail::Cap - Parse mailcap files
  Mail::Field - Base class for manipulation of mail header fields
  Mail::Field::AddrList - object representation of e-mail address lists
  Mail::Field::Date - a date header field
  Mail::Field::Generic - implementation for inspecific fields
  Mail::Filter - Filter mail through multiple subroutines
  Mail::Header - manipulate MIME headers
  Mail::Internet - manipulate email messages
  Mail::Mailer - Simple interface to electronic mailing mechanisms
  Mail::Send - Simple electronic mail interface
  Mail::Util - mail utility functions
Homepage: https://metacpan.org/release/MailTools

Package: libmath-random-isaac-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 54
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.004-2
Depends: perl:any
Recommends: libmath-random-isaac-xs-perl
Description: Perl interface to the ISAAC PRNG Algorithm
 Math::Random::ISAAC implements the ISAAC (Indirection, Shift, Accumulate, Add
 and Count) pseudorandom number generator (PRNG) algorithm described on the
 project page at: <URL:http://burtleburtle.net/bob/rand/isaac.html>
 .
 As with other algorithms like the Mersenne Twister (see Math::Random::MT),
 this algorithm is designed to take some seed information and produce seemingly
 random results as output.
 .
 The results are uniformly distributed, unbiased, and unpredictable unless you
 know the seed. The algorithm was published by Bob Jenkins in the late 1990s
 and despite the best efforts of many security researchers, no feasible attacks
 have been found to date.
 .
 For comparison with other algorithms intended to generate random data, the
 Mersenne Twister has a period of 2^19937-1, the related TT800 has a period
 of 2^800-1 values. ISAAC has a period of 2^8295 values on average.
Homepage: https://metacpan.org/release/Math-Random-ISAAC

Package: libmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmd (1.1.0-2)
Version: 1.1.0-2+b1
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
 The libmd library provides various message digest ("hash") functions,
 as found on various BSDs on a library with the same name and with a
 compatible API.
Homepage: https://www.hadrons.org/software/libmd/

Package: libmime-base32-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 23
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.303-3
Depends: perl:any
Description: Base32 encoder/decoder
 Similar to Base64, Base32 encodes arbitrary (binary) data in ASCII text.  The
 difference to Base64 is that Base32 encoding is case insensitive.
 .
 Base32 is defined in rfc3548 using the characters [A-Z2-7], but this module
 by default uses [0-9A-V] for compatibility with older versions of
 MIME::Base32.  An RFC compliant mode is also provided, though.
Homepage: https://metacpan.org/release/MIME-Base32

Package: libmime-tools-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 490
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 5.515-1
Depends: perl:any, libconvert-binhex-perl, libmailtools-perl
Description: Perl5 modules for MIME-compliant messages
 This package provides the MIME-tools modules. MIME::Tools is a
 collection of Perl5 MIME:: modules for parsing, decoding, and generating
 single- or multipart (even nested multipart) MIME messages.
Homepage: https://metacpan.org/release/MIME-tools

Package: libmnl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.5-3
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/

Package: libmodule-implementation-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 35
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.09-2
Depends: perl:any, libmodule-runtime-perl, libtry-tiny-perl
Description: module for loading one of several alternate implementations of a module
 Module::Implementation abstracts out the process of choosing one of several
 underlying implementations for a module. This can be used to provide XS and
 pure Perl implementations of a module, or it could be used to load an
 implementation for a given OS or any other case of needing to provide
 multiple implementations.
 .
 This module is only useful when you know all the implementations ahead of
 time. If you want to load arbitrary implementations then you probably want
 something like a plugin system, not this module.
Homepage: https://metacpan.org/release/Module-Implementation

Package: libmodule-runtime-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.018-1
Depends: perl:any, libparams-classify-perl
Description: Perl module for runtime module handling
 Module::Runtime deals with runtime handling of Perl modules, which are normally
 handled at compile time.
 .
 This module provide functions that can, for example, require or use modules at
 runtime, check for module names validity, compose module names and more.
Homepage: https://metacpan.org/release/Module-Runtime

Package: libmount1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 565
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Depends: libblkid1 (= 2.41-5), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Homepage: https://github.com/util-linux/util-linux

Package: libmspack0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Architecture: amd64
Multi-Arch: same
Source: libmspack (0.11-1.1)
Version: 0.11-1.1+b1
Replaces: libmspack0
Provides: libmspack0 (= 0.11-1.1+b1)
Depends: libc6 (>= 2.14)
Breaks: libmspack0 (<< 0.11-1.1)
Description: library for Microsoft compression formats (shared library)
 The purpose of libmspack is to provide both compression and decompression of
 some loosely related file formats used by Microsoft. The intention is to
 support all of the following formats: COMPRESS.EXE [SZDD],
 Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
 HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
 Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/

Package: libncurses6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 342
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libtinfo6 (= 6.5+20250216-2), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/

Package: libncursesw6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libtinfo6 (= 6.5+20250216-2), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/

Package: libnet-cidr-lite-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.22-2
Depends: perl:any
Description: module for merging IPv4 or IPv6 CIDR address ranges
 Net::CIDR::Lite is a faster alternative to Net::CIDR when merging a large
 number of CIDR address ranges. Works for IPv4 and IPv6 addresses.
Homepage: https://metacpan.org/release/Net-CIDR-Lite

Package: libnet-cidr-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 44
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.25-1
Depends: perl:any
Description: module to manipulate IPv4/IPv6 netblocks in CIDR notation
 The Net::CIDR module contains functions that manipulate lists of IP netblocks
 expressed in Classless Inter-Domain Routing (CIDR) notation.
 .
 Net::CIDR handles both IPv4 and IPv6 addresses.
Homepage: https://metacpan.org/release/Net-CIDR

Package: libnet-dbus-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 597
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libnet-dbus-perl (1.2.0-2)
Version: 1.2.0-2+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libxml-twig-perl
Description: Perl extension for the DBus bindings
 Net::DBus provides a Perl API for the DBus message system. The DBus Perl
 interface is currently operating against the 0.32 development version of
 DBus, but should work with later versions too, providing the API changes have
 not been too drastic.
 .
 Users of this package are either typically, service providers in which case
 the Net::DBus::Service and Net::DBus::Object modules are of most relevance,
 or are client consumers, in which case Net::DBus::RemoteService and
 Net::DBus::RemoteObject are of most relevance.
Homepage: https://metacpan.org/release/Net-DBus

Package: libnet-dns-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1027
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.50-1
Depends: perl:any, libdigest-hmac-perl, libdigest-sha-perl, libencode-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl
Recommends: libdigest-bubblebabble-perl, libnet-dns-sec-perl, libnet-libidn2-perl | libnet-libidn-perl, libperl4-corelibs-perl
Breaks: libpoe-component-client-dns-perl (<< 1:1.054-3~)
Description: module to perform DNS queries
 Net::DNS is a DNS resolver implemented in Perl supporting IPv6.
 It allows the programmer to perform nearly any type of DNS query
 from a Perl script.
Homepage: https://www.net-dns.org/

Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.23-1
Depends: perl:any, libio-socket-ip-perl, liburi-perl
Recommends: libio-socket-ssl-perl
Description: module providing low-level HTTP connection client
 The Net::HTTP class is a low-level HTTP client.  An instance of the
 Net::HTTP class represents a connection to an HTTP server.  The
 HTTP protocol is described in RFC 2616.  The Net::HTTP class
 supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
 You can mix its methods with reading and writing from the socket directly.
 This is not necessarily a good idea, unless you know what you are doing.
Homepage: https://metacpan.org/release/Net-HTTP

Package: libnet-ident-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.25-3
Depends: perl:any
Description: Perl module to lookup the username on the remote end of a TCP/IP connection
 Net::Ident is a Perl module implementing the RFC1413 Identification Protocol,
 also known as "ident".
 .
 It provides both a simple interface for doing one ident lookup at a time, and
 an asynchronous interface to perform (possibly) many simultaneous lookups, or
 simply continue serving other things while the lookup is proceeding.
Homepage: https://metacpan.org/release/Net-Ident

Package: libnet-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 104
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.26-4
Depends: perl:any
Description: Perl extension for manipulating IPv4/IPv6 addresses
 Net::IP provides functions to deal with IPv4/IPv6 addresses.
 The module can be used as a class, allowing the user to instantiate IP
 objects, which can be single IP addresses, prefixes, or ranges of addresses.
 There is also a procedural way of accessing most of the functions. Most
 subroutines can take either IPv4 or IPv6 addresses transparently.
Homepage: https://metacpan.org/release/Net-IP

Package: libnet-ldap-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1070
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:0.6800+dfsg-1
Depends: perl:any, libconvert-asn1-perl
Recommends: libgssapi-perl, libwww-perl
Suggests: libauthen-sasl-perl, libdigest-hmac-perl, libio-socket-ip-perl | libio-socket-inet6-perl, libio-socket-ssl-perl, libjson-perl, libtext-soundex-perl, liburi-perl, libxml-parser-perl, libxml-sax-perl
Description: client interface to LDAP servers
 Net::LDAP is a collection of Perl modules that implement an interface to
 various LDAP services. The module is capable of searching directories or
 performing maintenance functions such as adding, deleting or modifying
 entries.
Homepage: https://ldap.perl.org/

Package: libnet-server-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 514
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.014-1
Depends: perl:any, libcgi-pm-perl, libio-multiplex-perl, libio-socket-inet6-perl, libio-socket-ip-perl, libio-socket-ssl-perl, libnet-cidr-perl, libnet-ssleay-perl, libsocket-perl, libsocket6-perl
Suggests: liblog-log4perl-perl
Description: extensible, general perl server engine
 Net::Server is an extensible, general perl server engine that combines the
 good properties from Net::Daemon, NetServer::Generic, and Net::FTPServer;
 and borrows various concepts from the Apache webserver.
 .
 Features include:
 .
  * Single Server Mode
  * Inetd Server Mode
  * Preforking Simple Mode (PreForkSimple)
  * Preforking Managed Mode (PreFork)
  * Forking Mode
  * Multiplexing Mode using a single process
  * Multi port accepts on Single, Preforking, and Forking modes
  * Simultaneous accept/recv on tcp, udp, and unix sockets
  * Safe signal handling in Fork/PreFork avoids perl signal trouble
  * User customizable hooks
  * Chroot ability after bind
  * Change of user and group after bind
  * Basic allow/deny access control
  * Customized logging (choose Syslog, log_file, or STDERR)
  * HUP able server (clean restarts via sig HUP)
  * Dequeue ability in all Fork and PreFork modes.
  * Taint clean
  * Written in Perl
  * Protection against buffer overflow
  * Clean process flow
  * Extensibility
Homepage: https://metacpan.org/release/Net-Server

Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 20
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.04-2
Depends: libio-socket-ssl-perl, perl:any
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
 Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
 for its network operations. Due to the nature of Net::SMTP's new method, it is
 not overridden to make use of a default port for the SMTPS service. Perhaps
 future versions will be smart like that. Port 465 is usually what you want,
 and it's not a pain to specify that.
 .
 This package is deprecated. Net::SMTP (in perl core) has support for SMTP
 over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Homepage: https://metacpan.org/release/Net-SMTP-SSL

Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1363
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.94-3
Depends: perl (>= 5.40.1-2), perl-openssl-abi-3, perlapi-5.40.1, libc6 (>= 2.14), libssl3t64 (>= 3.2.0)
Description: Perl module for Secure Sockets Layer (SSL)
 Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
 (SSL) functions of the SSLeay library directly from your perl scripts. It
 is useful if you want to program robots that access secure web servers or
 if you want to build your own applications over SSL encrypted tunnels. If
 you just want to view web pages on https servers, you do not need this -
 your web browser already knows to do that.
Homepage: https://metacpan.org/release/Net-SSLeay

Package: libnetaddr-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 317
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libnetaddr-ip-perl (4.079+dfsg-2)
Version: 4.079+dfsg-2+b5
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.4)
Recommends: libsocket6-perl
Description: IP address manipulation module
 NetAddr::IP provides an object-oriented abstraction on top of IP addresses
 or IP subnets, that allows for easy manipulations.
 .
 The internal representation of all IP objects is in 128 bit IPv6 notation.
 IPv4 and IPv6 objects may be freely mixed.
 .
 The following operations are supported:
 Basic IP conversion, netmask manipulation, subnet interpretation, bitwise
 mask generation, full mask generation, subnet manipulation, expansion, and
 range operations, sub/supernet tests, data type determination, and more
 complex operations such as expansion of netblocks into arrays of smaller
 blocks of arbitrary size, and CIDR block aggregation
Homepage: https://metacpan.org/release/NetAddr-IP

Package: libnettle8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 560
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.10.1-1
Replaces: libnettle8
Provides: libnettle8 (= 3.10.1-1)
Depends: libc6 (>= 2.17)
Breaks: libnettle8 (<< 3.10.1-1)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: https://www.lysator.liu.se/~nisse/nettle/

Package: libnewt0.52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 365
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.25-1
Depends: libc6 (>= 2.38), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://pagure.io/newt

Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1054
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.1.3-1
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libjansson4 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.9), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.
Homepage: https://www.netfilter.org/

Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.9-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
 libnftnl is the low-level library for Netfilter 4th generation
 framework nftables.
 .
 Is the user-space library for low-level interaction with
 nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.64.0-1.1
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/

Package: libnghttp3-9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp3
Version: 1.8.0-1
Depends: libc6 (>= 2.14)
Description: HTTP/3 library with QUIC and QPACK (library)
 nghttp3 implements HTTP/3 functions in C. For now it supports several
 HTTP actions like request, response and server push.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/nghttp3

Package: libngtcp2-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 327
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ngtcp2
Version: 1.11.0-1
Depends: libc6 (>= 2.25)
Description: implementation of QUIC protocol (library)
 ngtcp2 project is an effort to implement QUIC protocol which is
 now being discussed in IETF QUICWG for its standardization.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/ngtcp2

Package: libngtcp2-crypto-gnutls8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ngtcp2
Version: 1.11.0-1
Depends: libc6 (>= 2.14), libgnutls30t64 (>= 3.8.2), libngtcp2-16 (>= 1.1.0)
Description: implementation of QUIC protocol (library)
 ngtcp2 project is an effort to implement QUIC protocol which is
 now being discussed in IETF QUICWG for its standardization.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/ngtcp2

Package: libnpth0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Eric Dorland <eric@debian.org>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.8-3
Replaces: libnpth0
Provides: libnpth0 (= 1.8-3)
Depends: libc6 (>= 2.34)
Breaks: libnpth0 (<< 1.8-3)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/

Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnsl (1.3.0-3)
Version: 1.3.0-3+b3
Depends: libc6 (>= 2.38), libtirpc3t64 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
 This package contains the libnsl library, which contains the public client
 interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
 now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl

Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 321
Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nspr
Version: 2:4.36-1
Depends: libc6 (>= 2.38)
Description: NetScape Portable Runtime Library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/

Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4488
Maintainer: Maintainers of Mozilla-related packages <team+pkg-mozilla@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.110-1
Depends: libc6 (>= 2.34), libnspr4 (>= 2:4.34), libsqlite3-0 (>= 3.5.9)
Description: Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
Homepage: https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS

Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 532
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.3-2.1~deb13u1
Depends: libc6 (>= 2.34)
Description: JPEG 2000 image compression/decompression library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the runtime files for openjpeg 2.x
Homepage: https://www.openjpeg.org

Package: libp11-kit0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1882
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.25.5-3
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 923
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.7.0-5
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libdb5.3t64, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.7.0-5)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 55930ab185d7c100b58da36cd44f1dc5
 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5
 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
 /etc/security/namespace.init 260eb0c3368ffaaf861e003e27618476
 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
 /etc/security/pwhistory.conf 46472157dab7894436c6ba3ccdfcaca6
 /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 206
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.7.0-5
Replaces: libpam-modules (<< 1.5.2-5~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1028
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.7.0-5
Replaces: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0)
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Breaks: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0)
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libpam0g
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 194
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.7.0-5
Replaces: libpam0g-util, libpam0t64 (<< 1.5.3-5)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Breaks: libpam0t64 (<< 1.5.3-5)
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 554
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: fontconfig (>= 2.15.0), libc6 (>= 2.38), libfribidi0 (>= 1.0.0), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libthai0 (>= 0.1.25)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.18.0), libfontconfig1 (>= 2.15.0), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libpango-1.0-0 (= 1.56.3-1), libpangoft2-1.0-0 (= 1.56.3-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.15.0), libfreetype6 (>= 2.2.1), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libpango-1.0-0 (= 1.56.3-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libparams-classify-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 63
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libparams-classify-perl (0.015-2)
Version: 0.015-2+b4
Depends: libdevel-callchecker-perl, perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4)
Suggests: libscalar-number-perl
Description: Perl module for argument type classification
 Params::Classify provides various type-testing functions. These are intended
 for functions that, unlike most Perl code, care what type of data they
 are operating on. For example, some functions wish to behave
 differently depending on the type of their arguments (like overloaded
 functions in C++).
 .
 These functions only provide type classification; they do not enforce
 type restrictions. Type enforcement may, of course, be built using
 these classification functions, but the reader's attention is drawn to
 libparams-validate-perl.
Homepage: https://metacpan.org/release/Params-Classify

Package: libparams-util-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libparams-util-perl (1.102-3)
Version: 1.102-3+b1
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4)
Description: Perl extension for simple stand-alone param checking functions
 Params::Util provides a basic set of importable functions that makes checking
 parameters easier. The functions provided by Params::Util check in the most
 strictly correct manner, and it should not be fooled by odd cases.
Homepage: https://metacpan.org/release/Params-Util

Package: libparams-validate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 170
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libparams-validate-perl (1.31-2)
Version: 1.31-2+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libmodule-implementation-perl, libscalar-list-utils-perl
Description: Perl module to validate parameters to Perl method/function calls
 Params::Validate is a Perl module providing a flexible way to validate method
 and function call parameters. The validation can be as simple as checking for
 the presence of required parameters, or more complex, like validating object
 classes (via isa) or capabilities (via can) and checking parameter types. It
 also provides extensibility through customized validation callbacks.
 .
 The module has been designed to work equally well with positional or named
 parameters (via a hash or hash reference) and includes experimental support
 for attributes (see Attribute::Params::Validate for details).
Homepage: https://metacpan.org/release/Params-Validate

Package: libpcre2-8-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 774
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.46-1~deb13u1
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 8 bit runtime library, which operates on
 ASCII and UTF-8 input.
Homepage: https://github.com/PCRE2Project/pcre2

Package: libperl5.40
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29315
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.40.1-6
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libgdbm-compat4t64 (>= 1.18-3), libgdbm6t64 (>= 1.21), zlib1g (>= 1:1.2.3.3), perl-modules-5.40 (>= 5.40.1-6)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libfilter-perl (<< 1.64), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.40 which contains the
 architecture-independent parts).
Homepage: https://dev.perl.org/perl5/

Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 715
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.44.0-3
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
 A library for manipulating pixel regions -- a set of Y-X banded
 rectangles, image compositing using the Porter/Duff model
 and implicit mask generation for geometric primitives including
 trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/

Package: libpmg-rs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 10737
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Version: 0.8.1
Depends: libproxmox-rs-perl (>= 0.4.0), perl (>= 5.40.1-6), perlapi-5.40.1, libapt-pkg7.0 (>= 1.9~), libc6 (>= 2.39), libgcc-s1 (>= 4.2), libssl3t64 (>= 3.0.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16)
Breaks: pmg-api (<< 7.1-4)
Description: Components of Proxmox Mail Gateway which have been ported to Rust.
 Contains parts of Proxmox Mail Gateway which have been ported to, or newly
 implemented in the Rust programming language.
Homepage: https://www.proxmox.com

Package: libpng16-16t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 439
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.48-1
Replaces: libpng16-16
Provides: libpng16-16 (= 1.6.48-1)
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-16 (<< 1.6.48-1)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpoppler147
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4857
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: poppler
Version: 25.03.0-5
Depends: libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.16.2), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgpgmepp6t64 (>= 1.24.2), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.16), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.46), libstdc++6 (>= 13.1), libtiff6 (>= 4.0.3), zlib1g (>= 1:1.1.4)
Recommends: poppler-data
Suggests: gpgsm (>= 2.2.42)
Description: PDF rendering library
 Poppler is a PDF rendering library based on Xpdf PDF viewer.
 .
 This package contains the shared core library.
Homepage: https://poppler.freedesktop.org/

Package: libpopt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.19+dfsg-2
Depends: libc6 (>= 2.38)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt

Package: libpq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1079
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: postgresql-17
Version: 17.6-0+deb13u1
Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libldap2 (>= 2.6.2), libssl3t64 (>= 3.0.0)
Recommends: ca-certificates
Description: PostgreSQL C client library
 libpq is a C library that enables user programs to communicate with
 the PostgreSQL database server.  The server can be on another machine
 and accessed through TCP/IP.  This version of libpq is compatible
 with servers from PostgreSQL 8.2 or later.
 .
 This package contains the run-time library, needed by packages using
 libpq. SSL certificate validation (the sslrootcert=system connection
 option) requires the ca-certificates package.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/

Package: libproc2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 237
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:4.0.4-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.38), libsystemd0
Description: library for accessing process information from /proc
 The libproc2 library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libproc2.
Homepage: https://gitlab.com/procps-ng/procps

Package: libproxmox-acme-perl
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 41
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Source: libproxmox-acme
Version: 1.7.0
Replaces: libpve-common-perl (<< 6.0-20)
Depends: libpve-common-perl (>= 6~), perl:any
Recommends: libproxmox-acme-plugins
Breaks: libpve-common-perl (<< 6.0-20)
Description: Proxmox ACME integration perl library
 Used in perl-based Proxmox project as common interface for DNS and HTTP ACME
 challenges.
Homepage: https://www.proxmox.com

Package: libproxmox-acme-plugins
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 990
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Source: libproxmox-acme
Version: 1.7.0
Replaces: libproxmox-acme-perl (<< 1.1.0)
Depends: coreutils (>= 8.30-1), curl (>= 7.64.0-1), sed (>= 4.7-1)
Recommends: idn
Breaks: libproxmox-acme-perl (<< 1.1.0)
Description: Proxmox acme.sh wrapper for DNS API plugins
 Used in Proxmox project to provide DNS API plugins for issuing ACME DNS
 challenges with a small wrapper executable.
Homepage: https://www.proxmox.com

Package: libproxmox-rs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 0.4.1
Replaces: libpve-rs-perl (<< 0.6.0)
Depends: libpve-rs-perl (>= 0.10.0) | libpmg-rs-perl (>= 0.8.0), perl:any
Breaks: libpmg-rs-perl (<< 0.6.2), libpve-rs-perl (<< 0.7.2)
Description: PVE/PMG common perl parts for Rust perlmod bindings
 Contains the perl side of modules provided by the libraries of both
 libpve-rs-perl and libpmg-rs-perl, loading whichever is available.
Homepage: https://www.proxmox.com

Package: libpsl5t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: amd64
Multi-Arch: same
Source: libpsl (0.21.2-1.1)
Version: 0.21.2-1.1+b1
Replaces: libpsl5
Provides: libpsl5 (= 0.21.2-1.1+b1)
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring5 (>= 1.1)
Recommends: publicsuffix (>= 20150507)
Breaks: libpsl5 (<< 0.21.2-1.1)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libpve-apiclient-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 37
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 3.4.0
Depends: libcrypt-ssleay-perl, libhttp-message-perl, libio-socket-ssl-perl, libjson-perl, liburi-perl, libwww-perl, perl:any
Description: Proxmox VE API client library
 This implements an API client for Proxmox VE in perl.
Homepage: https://www.proxmox.com

Package: libpve-common-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 539
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 9.0.11
Depends: libanyevent-perl, libclone-perl, libcrypt-openssl-random-perl, libcrypt-openssl-rsa-perl, libdevel-cycle-perl, libfilesys-df-perl, libhttp-daemon-perl, libhttp-message-perl, libio-stringy-perl, libjson-perl, liblinux-inotify2-perl, libmime-base32-perl, libnet-dbus-perl, libnet-ip-perl, libnetaddr-ip-perl, libproxmox-acme-perl, libproxmox-rs-perl, libstring-shellquote-perl, libtimedate-perl, liburi-perl, libwww-perl, libyaml-libyaml-perl, perl:any
Breaks: ifupdown2 (<< 2.0.1-1+pve5), libpve-guest-common-perl (<< 5.0.1), pmg-api (<< 7.1-5), pve-container (<< 4.3-1), pve-manager (<< 7.2-9), qemu-server (<< 8.0.1)
Description: Proxmox VE base library
 This package contains the base library used by other Proxmox VE components.

Package: libpve-http-server-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 119
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 6.0.4
Depends: libanyevent-http-perl, libanyevent-perl (>= 7.140-3), libcrypt-ssleay-perl, libhtml-parser-perl, libhttp-date-perl, libhttp-message-perl, libio-socket-ssl-perl, libjs-bootstrap5, libjson-perl, libnet-ip-perl, libpve-common-perl (>= 8.0.2), liburi-perl, perl:any
Breaks: libpve-storage-perl (<< 8.2.5), pmg-api (<< 8.1.4), pve-manager (<< 8.2.7)
Description: Proxmox Asynchrounous HTTP Server Implementation
 This package is used as base to implement the REST API in all perl based
 Proxmox projects.
Homepage: https://www.proxmox.com

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 28
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.13.5-1
Depends: libpython3.13-stdlib (>= 3.13.5-1~)
Description: interactive high-level object-oriented language (default python3 version)
 This package contains the majority of the standard library for the Python
 language (default python3 version).
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's standard library (currently v3.13).
Homepage: https://www.python.org/

Package: libpython3.13-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5450
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.13
Version: 3.13.5-2
Replaces: libpython3.13-stdlib (<< 3.13.1-3~)
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.4.0)
Recommends: libpython3.13-stdlib
Breaks: libpython3.13-stdlib (<< 3.13.1-3~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.13/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.13)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.13-minimal.

Package: libpython3.13-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8891
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.13
Version: 3.13.5-2
Depends: libpython3.13-minimal (= 3.13.5-2), media-types | mime-support, netbase, tzdata, libbz2-1.0, libc6 (>= 2.38), libdb5.3t64, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libreadline8t64 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libuuid1 (>= 2.20.1)
Description: Interactive high-level object-oriented language (standard library, version 3.13)
 Python is a high-level, interactive, object-oriented language. Its 3.13 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.13's standard library. It is normally not
 used on its own, but as a dependency of python3.13.

Package: libqrencode4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: NIIBE Yutaka <gniibe@fsij.org>
Architecture: amd64
Multi-Arch: same
Source: qrencode
Version: 4.1.1-2
Depends: libc6 (>= 2.14)
Description: QR Code encoding library
 Libqrencode is a library for encoding data in a QR Code symbol, a kind of 2D
 symbology that can be scanned by handy terminals such as a mobile phone with
 CCD.  The capacity of QR Code is up to 7000 digits or 4000 characters, and has
 high robustness.
 .
 Libqrencode supports QR Code model 2, described in JIS (Japanese Industrial
 Standards) X0510:2004 or ISO/IEC 18004.
 .
 This package contains runtime libraries of libqrencode.
Homepage: https://fukuchi.org/works/qrencode/index.html.en

Package: libreadline8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 485
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.2-6
Replaces: libreadline8
Provides: libreadline8 (= 8.2-6)
Depends: readline-common, libc6 (>= 2.38), libtinfo6 (>= 6)
Breaks: libreadline8 (<< 8.2-6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html

Package: librrd8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 496
Maintainer: Debian RRDtool Team <team+rrdtool@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rrdtool
Version: 1.7.2-4.2+pve3
Replaces: librrd8
Provides: librrd8 (= 1.7.2-4.2+pve3)
Depends: libc6 (>= 2.38), libcairo2 (>= 1.2.4), libdbi1t64 (>= 0.8.4), libglib2.0-0t64 (>= 2.28.0), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libpng16-16t64 (>= 1.6.46), libxml2 (>= 2.7.4)
Recommends: fonts-dejavu-core | ttf-bitstream-vera
Breaks: librrd8 (<< 1.7.2-4.2+pve3)
Description: time-series data storage and display system (runtime library)
 The Round Robin Database Tool (RRDtool) is a system to store and display
 time-series data (e.g. network bandwidth, machine-room temperature,
 server load average). It stores the data in Round Robin Databases (RRDs),
 a very compact way that will not expand over time. RRDtool processes the
 extracted data to enforce a certain data density, allowing for useful
 graphical representation of data values.
 .
 This package contains shared libraries used to access and manipulate RRDs.
Homepage: https://oss.oetiker.ch/rrdtool/

Package: librrds-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 175
Maintainer: Debian RRDtool Team <team+rrdtool@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rrdtool
Version: 1.7.2-4.2+pve3
Depends: perl (>= 5.40.1-6), perlapi-5.40.1, libc6 (>= 2.4), librrd8t64 (>= 1.7.0)
Description: time-series data storage and display system (Perl interface, shared)
 The Round Robin Database Tool (RRDtool) is a system to store and display
 time-series data (e.g. network bandwidth, machine-room temperature,
 server load average). It stores the data in Round Robin Databases (RRDs),
 a very compact way that will not expand over time. RRDtool processes the
 extracted data to enforce a certain data density, allowing for useful
 graphical representation of data values.
 .
 This package contains a Perl interface to RRDs using a shared library: Rrds.
Homepage: https://oss.oetiker.ch/rrdtool/

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump (2.4+20151223.gitfa8646d.1-2)
Version: 2.4+20151223.gitfa8646d.1-2+b5
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.1), libhogweed6t64, libnettle8t64, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/

Package: libsasl2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-9
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.28+dfsg1-9), libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Recommends: libsasl2-modules (>= 2.1.28+dfsg1-9)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 282
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-9
Replaces: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4)
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4)
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, SCRAM, CRAM-MD5, and DIGEST-MD5 (with DES support, deprecated).
Homepage: https://www.cyrusimap.org/sasl/

Package: libsasl2-modules-db
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-9
Depends: libc6 (>= 2.14), libdb5.3t64
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Kees Cook <kees@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.6.0-2
Depends: libc6 (>= 2.14)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: libselinux1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.8.1-1
Depends: libc6 (>= 2.38), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: https://github.com/SELinuxProject

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.8.1-1
Conffiles:
 /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsemanage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 313
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 3.8.1-1
Depends: libsemanage-common (>= 3.8.1-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.38), libselinux1 (>= 3.8.1), libsepol2 (>= 3.8.1)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsepol2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 835
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.8.1-1
Depends: libc6 (>= 2.38)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org

Package: libsharpyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.29)
Description: Library for sharp RGB to YUV conversion
 This library provides the function to convert RGB to YUV420 using
 a downsampling algorithm that minimizes artefacts caused by chroma
 subsampling.
 .
 This package provides the shared library files.
Homepage: https://developers.google.com/speed/webp/

Package: libslang2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2395
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2 (2.3.3-5)
Version: 2.3.3-5+b2
Depends: libc6 (>= 2.38)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 15.1.0-1)
Homepage: http://www.jedsoft.org/slang/

Package: libsmartcols1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 377
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Depends: libc6 (>= 2.38)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Homepage: https://github.com/util-linux/util-linux

Package: libsocket6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libsocket6-perl (0.29-3)
Version: 0.29-3+b4
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.4)
Description: Perl extensions for IPv6
 The Socket6 module supports getaddrinfo() and getnameinfo() to intend
 to enable protocol independent programming. If your environment
 supports IPv6, IPv6 related defines such as AF_INET6 are included.
Homepage: https://metacpan.org/release/Socket6

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1834
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.46.1-7
Depends: libc6 (>= 2.38)
Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/

Package: libss2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b3
Replaces: e2fsprogs (<< 1.34-1), libss2t64
Provides: libss2t64 (= 1.47.2-3+b3)
Depends: libcom-err2, libc6 (>= 2.34)
Breaks: libss2t64 (<< 1.47.0-2.4~exp1~)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libssh2-1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 437
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh2
Version: 1.11.1-1
Replaces: libssh2-1
Provides: libssh2-1 (= 1.11.1-1)
Depends: libc6 (>= 2.25), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libssh2-1 (<< 1.11.1-1)
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: https://libssh2.org/

Package: libssl3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8081
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.5.1-1+deb13u1
Replaces: libssl3
Provides: libssl3 (= 3.5.1-1+deb13u1)
Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4), openssl-provider-legacy
Breaks: libssl3 (<< 3.5.1-1+deb13u1), openssh-client (<< 1:9.4p1), openssh-server (<< 1:9.4p1), python3-m2crypto (<< 0.38.0-4)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://openssl-library.org

Package: libstdc++6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3019
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Replaces: libstdc++6-14-dbg (<< 4.9.0-3)
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38), libgcc-s1 (>= 4.3)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libstring-shellquote-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.04-3
Depends: perl:any
Description: module to quote strings for passing through the shell
 The String::ShellQuote module contains some functions which are useful for
 quoting strings which are going to pass through the shell or a shell-like
 object, plus a command-line interface to it. It is useful for doing robust
 tool programming, particularly when dealing with files whose names contain
 white space or shell globbing characters.
Homepage: https://metacpan.org/release/String-ShellQuote

Package: libsub-exporter-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 155
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.990-1
Depends: perl:any, libdata-optlist-perl, libsub-install-perl
Description: sophisticated exporter for custom-built routines
 When you use a perl module, first it is "required" function used, then its
 import method is called.
 .
 Sub::Exporter provides a sophisticated alternative to Exporter.pm.  It allows
 for renaming, currying/sub-generation etc.
 .
 Sub::Exporter builds a custom exporter which can then be installed into your
 module. It builds this method based on configuration passed to its
 setup_exporter method.
Homepage: https://metacpan.org/release/Sub-Exporter

Package: libsub-install-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.929-1
Depends: perl:any
Description: module for installing subroutines into packages easily
 Sub::Install module makes it easy to install subroutines into packages
 without the unsightly mess of no strict or typeglobs lying about where
 just anyone can see them.
Homepage: https://github.com/rjbs/Sub-Install

Package: libsys-hostname-long-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 34
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5-3
Depends: perl:any
Description: module tp determine the long (fully-qualified) hostname
 Sys::Hostname::Long determines the host full name on multiple
 operating systems (MacOS, Windows, Unix-like systems; more later.)
 .
 The Sys::Hostname class is the best and standard way to get the basic
 hostname, but that may not be fully qualified.  This module tries to
 determine the host's fully qualified name.
Homepage: https://metacpan.org/release/Sys-Hostname-Long

Package: libsystemd-shared
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6812
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.8-1~deb13u2
Depends: libacl1 (>= 2.2.23), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.30.2), libc6 (>= 2.39), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.4.0), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.4.0)
Recommends: libkmod2, libzstd1
Suggests: libarchive13t64, libbpf1, libcryptsetup12, libdw1t64, libelf1t64, libfido2-1, libgcrypt20, libidn2-0, libip4tc2, liblz4-1, liblzma5, libp11-kit0, libpcre2-8-0, libpwquality1, libqrencode4, libtss2-rc0t64
Description: systemd shared private library
 This internal shared library provides common code used by various systemd
 components. It is supposed to decrease memory and disk footprint.
 The shared library is not meant for public use and is not API or ABI stable.
Homepage: https://systemd.io

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1222
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.8-1~deb13u2
Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10)
Recommends: libzstd1
Suggests: libgcrypt20, liblz4-1, liblzma5
Description: systemd utility library
 This library provides APIs to interface with various system components such as
 the system journal, the system service manager, D-Bus and more.
Homepage: https://systemd.io

Package: libtasn1-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 122
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 4.20.0-2
Depends: libc6 (>= 2.38)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/

Package: libtemplate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1497
Maintainer: Benjamin Mako Hill <mako@debian.org>
Architecture: amd64
Source: libtemplate-perl (2.27-1)
Version: 2.27-1+b8
Provides: templatetoolkit-perl
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libappconfig-perl (>= 1.56)
Suggests: libtemplate-plugin-gd-perl, libtemplate-plugin-xml-perl
Conflicts: libtemplate-perl-doc
Description: "Template Toolkit" template processing system in Perl
 The Template Toolkit is a fast, powerful, flexible, and easily
 extensible template processing system written in Perl. It is ideally
 suited for (but not limited) to the creation of static and dynamic web
 content. It includes support for all standard templating directives
 and many additional features including output filtering, exception
 handling, macro definition, support for plugin objects, definition of
 template metadata, embedded Perl code, and much more.
 .
 This package contains the 'tpage' and 'ttree' executables which serve
 as simple, powerful tools in the creation of static content without
 any prerequisite knowledge of Perl. It also contains an extensive set
 of Perl modules ideally suited to act as a templating system in the
 dynamic creation of web content.
 .
 Excellent offline batch processing makes it ideal for generating
 non-web-based content including POD, LaTeX, PostScript, and plain text
 from source templates.
 .
 This package also includes Doug Steinwand's high-speed drop-in
 replacement for Template::Stash written in Perl XS.
Homepage: https://metacpan.org/release/Template-Toolkit

Package: libterm-readline-gnu-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 380
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libterm-readline-gnu-perl (1.46-1)
Version: 1.46-1+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14), libreadline8t64 (>= 8.2~beta), libtinfo6 (>= 6)
Description: Perl extension for the GNU ReadLine/History Library
 Term::ReadLine::Gnu is a Perl interface to the GNU ReadLine Library, allowing
 developers to provide features including input line editing, input history
 management, word completion and more.
 .
 Through this module, you have access to almost all variables and functions as
 documented in the GNU ReadLine/History Library. This means you can write your
 custom editing function, custom completion function, and so on, with Perl.
 You may find it useful for prototyping before programming with C.
Homepage: https://metacpan.org/release/Term-ReadLine-Gnu

Package: libtesseract5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3948
Maintainer: Alexander Pozdnyakov <almipo@mail.ru>
Architecture: amd64
Multi-Arch: same
Source: tesseract (5.5.0-1)
Version: 5.5.0-1+b1
Replaces: tesseract-ocr (<< 3.01~)
Depends: libarchive13t64 (>= 3.0.4), libc6 (>= 2.38), libcurl4t64 (>= 7.16.2), libgcc-s1 (>= 3.0), libgomp1 (>= 4.9), libleptonica6 (>= 1.75.3), libstdc++6 (>= 13.1)
Breaks: ocropus (<< 0.4.0~), tesseract-ocr (<< 3.01~)
Description: Tesseract OCR library
 Tesseract is an open source Optical Character Recognition (OCR)
 Engine. It can be used directly, or (for programmers) using an API to
 extract printed text from images. It supports a wide variety of
 languages. This package includes the shared library.
Homepage: https://github.com/tesseract-ocr/

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtext-charwidth-perl (0.04-11)
Version: 0.04-11+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: get display widths of characters on the terminal
 Text::CharWidth permits one to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: https://metacpan.org/release/Text-CharWidth

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 50
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtext-iconv-perl (1.7-8)
Version: 1.7-8+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: module to convert between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: https://metacpan.org/release/Text-Iconv

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 26
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.06-10
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 The Text::WrapI18N module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters
 such as east Asian characters, combining characters such as diacritical marks
 and Thai, and languages which don't use whitespaces between words such as
 Chinese and Japanese.
 .
 It provides wrap().
Homepage: https://metacpan.org/release/Text-WrapI18N

Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 618
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-2
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libthai (0.1.29-2)
Version: 0.1.29-2+b1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains the shared libraries needed to run programs that use
 the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libtiff6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 766
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.7.0-3
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.5.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libimager-perl (<< 1.022+dfsg)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Homepage: https://metacpan.org/release/TimeDate

Package: libtinfo6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 569
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libc6 (>= 2.34)
Breaks: tmux (<< 3.3a-4)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/

Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Josue Ortega <josue@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.6+ds-1
Replaces: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the netconfig configuration file as well as the
 associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtirpc3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.6+ds-1
Replaces: libtirpc3
Provides: libtirpc3 (= 1.3.6+ds-1)
Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.6+ds-1)
Breaks: libtirpc3 (<< 1.3.6+ds-1), nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtlsrpt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Simon Josefsson <simon@josefsson.org>
Architecture: amd64
Multi-Arch: same
Source: libtlsrpt
Version: 0.5.0rc1-2
Depends: libc6 (>= 2.4)
Description: library to implement TLSRPT reporting into an MTA (shared lib)
 libtlsrpt is a low-level C Library. It provides functions that help
 generate TLSRPT datagrams. Included into a MTA it assists the MTA in
 collecting and sending these datagrams to a TLSRPT reporting service
 where they can be collected, summarized and finally sent to a mail
 platform that requests TLSRPT reports.
 .
 The keyword TLSRPT refers to an IETF Standard for SMTP TLS Reporting
 as defined in RFC 8460. SMTP TLS Reporting standardizes informing
 other mail platforms of successes and failures establishing a SMTP
 TLS session between a sending and a receiving MTA. It helps to find
 out if a receiving (e.g. your) platform has issues regarding TLS or
 if the sending platform runs into TLS problems
 (i.e. Machine-in-the-Middle attack, STARTTLS downgrade) while it
 tries to establish a TLS protected session with a receiver.
 .
 This package contains the static and shared C "libtlsrpt" library.
Homepage: https://github.com/sys4/libtlsrpt

Package: libtry-tiny-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 46
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.32-1
Depends: perl:any
Suggests: libsub-name-perl
Description: module providing minimalistic try/catch
 Try::Tiny is a Perl module that provides bare bones try/catch statements. It
 is designed to eliminate common mistakes with eval blocks, and NOTHING else.
 .
 The main focus of this module is to provide simple and reliable error
 handling for those having a hard time installing TryCatch, but who still want
 to write correct eval blocks without 5 lines of boilerplate each time.
Homepage: https://metacpan.org/release/Try-Tiny

Package: libudev1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.8-1~deb13u2
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10)
Suggests: libidn2-0
Description: libudev shared library
 This library provides APIs to introspect and enumerate devices on the local
 system.
Homepage: https://systemd.io

Package: libunistring5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2092
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.3-2
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libunistring/

Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 283
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.30-1
Depends: perl:any, libencode-perl, libscalar-list-utils-perl
Suggests: libbusiness-isbn-perl, libmime-base32-perl, libregexp-ipv6-perl, libwww-perl
Breaks: sqitch (<< 1.3.1-2~)
Description: module to manipulate and access URI strings
 URI is a collection of Perl modules that represent and manipulate Uniform
 Resource Identifier (URI) references as specified in RFC 2396.
 .
 URI objects can be used to access and manipulate the various components
 that make up these strings.  There are also methods to combine URIs in
 various ways.
 .
 The URI class replaces the URI::URL class that used to be distributed with
 libwww-perl. This package also includes an emulation of the old URI::URL
 interface, which implements both the old and the new interface.
Homepage: https://metacpan.org/release/URI

Package: libuuid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41-5
Replaces: libuuid1t64
Provides: libuuid1t64 (= 2.41-5)
Depends: libc6 (>= 2.38)
Suggests: uuid-runtime
Breaks: libuuid1t64 (<< 2.41-5)
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Homepage: https://github.com/util-linux/util-linux

Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 631
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.34), libsharpyuv0 (>= 1.5.0)
Description: Lossy compression of digital photographic images (shared library)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.29), libwebp7 (>= 1.5.0)
Description: Lossy compression of digital photographic images (libwebpmux library)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-36
Depends: libc6 (>= 2.33)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libwtmpdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Andrew Bower <andrew@bower.uk>
Architecture: amd64
Multi-Arch: same
Source: wtmpdb
Version: 0.73.0-3
Depends: libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Description: wtmp database shared library
 Year 2038-safe wtmp database implementation, library files.
 .
 This library provides an abstraction for reading and manipulating
 wtmpdb login and reboot records.
Homepage: https://github.com/thkukuk/wtmpdb/

Package: libwww-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 416
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 6.78-1
Depends: perl:any, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl, libtry-tiny-perl, liburi-perl, libwww-robotrules-perl, netbase
Recommends: libdata-dump-perl, libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl
Suggests: libauthen-ntlm-perl
Description: simple and consistent interface to the world-wide web
 libwww-perl (also known as LWP) is a collection of Perl modules that provide
 a simple and consistent programming interface (API) to the World-Wide Web.
 The main focus of the library is to provide classes and functions that allow
 you to write WWW clients. It also contains general purpose modules, as well
 as a simple HTTP/1.1-compatible server implementation.
Homepage: https://metacpan.org/release/libwww-perl

Package: libwww-robotrules-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 36
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, liburi-perl
Breaks: libwww-perl (<< 6.00)
Description: database of robots.txt-derived permissions
 WWW::RobotRules parses /robots.txt files as specified in "A Standard for
 Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters
 can use the /robots.txt file to forbid conforming robots from accessing parts
 of their web site.
 .
 The parsed files are kept in a WWW::RobotRules object, and this object
 provides methods to check if access to a given URL is prohibited. The same
 WWW::RobotRules object can be used for one or more parsed /robots.txt files
 on any number of hosts.
Homepage: https://metacpan.org/release/WWW-RobotRules

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1638
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.12-1
Depends: libc6 (>= 2.38), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1576
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.8.12-1
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.11-1
Depends: libc6 (>= 2.33)
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau

Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 181
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
 This package contains the library files needed to run software using
 libxcb-render, the render extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 301
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.38), libxau6 (>= 1:1.0.9), libxdmcp6
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxdgmime-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 81
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Version: 1.2.0
Depends: perl (>= 5.40.1-3), perlapi-5.40.1, libc6 (>= 2.38)
Description: Perl extension to access xdgmime functions
 This module is a simple module that parses the proposed MIME spec listed
 at http://freedesktop.org/.  It is currently targeted at version 0.12.

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.5-1
Depends: libc6 (>= 2.36)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXdmcp

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.4-1)
Version: 2:1.3.4-1+b3
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: libxml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 685
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libxml-parser-perl (2.47-1)
Version: 2.47-1+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14), libexpat1 (>= 2.0.1), liburi-perl, libwww-perl
Description: Perl module for parsing XML files
 The XML::Parser module provides ways to parse XML documents.  It is built on
 top of XML::Parser::Expat, which is a lower level interface to James Clark's
 expat library. Each call to one of the parsing methods creates a new instance
 of XML::Parser::Expat which is then used to parse the document. Expat options
 may be provided when the XML::Parser object is created. These options are
 then passed on to the Expat object on each parse call. They can also be given
 as extra arguments to the parse methods, in which case they override options
 given at XML::Parser creation time.
 .
 The behavior of the parser is controlled either by Style and/or Handlers
 options, or by setHandlers method. These all provide mechanisms for
 XML::Parser to set the handlers needed by XML::Parser::Expat. If neither
 Style nor Handlers are specified, then parsing just checks the document for
 being well-formed.
 .
 When underlying handlers get called, they receive as their first parameter
 the Expat object, not the Parser object.
Homepage: https://metacpan.org/release/XML-Parser

Package: libxml-twig-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 570
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:3.52-3
Depends: perl:any, libxml-parser-perl
Recommends: libhtml-parser-perl, libtext-iconv-perl, libtie-ixhash-perl, libwww-perl, libxml-xpathengine-perl | libxml-xpath-perl
Suggests: libunicode-map8-perl, libunicode-string-perl, xml-twig-tools
Description: Perl module for processing huge XML documents in tree mode
 The XML::Twig module provides a way to process XML documents.  It is built on
 top of XML::Parser.
 .
 The module offers a tree interface to the document, while allowing to
 output the parts of it that have been completely processed.
 .
 It allows minimal resource (CPU and memory) usage by building the
 tree only for the parts of the documents that need actual processing,
 through the use of the twig_roots and twig_print_outside_roots
 options.  The finish and finish_print methods also help to increase
 performance.
 .
 XML::Twig tries to make simple things easy so it tries its best to
 takes care of a lot of the (usually) annoying (but sometimes
 necessary) features that come with XML and XML::Parser.
Homepage: https://metacpan.org/release/XML-Twig

Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1915
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.12.7+dfsg+really2.9.14-2.1+deb13u1
Depends: libc6 (>= 2.38), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Conflicts: w3c-dtd-xhtml
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org

Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.12-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
 The X Rendering Extension (Render) introduces digital image composition as
 the foundation of a new rendering model within the X Window System.
 Rendering geometric figures is accomplished by client-side tessellation into
 either triangles or trapezoids.  Text is drawn by loading glyphs into the
 server and rendering sets of them.  The Xrender library exposes this
 extension to X clients.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrender

Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 497
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.35-1.2+deb13u2
Depends: libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.11-2
Depends: libc6 (>= 2.34)
Description: netfilter xtables library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 However, even if a given system may be fully running on native nftables,
 there are other reasons why libxtables might be installed. For one, nftables
 itself uses it to be able to display old rulesets that were created using
 xtables extensions (to help folks migrate). Other third-party software might
 also be linked to this library.
 .
 This library being installed in the system should be harmless in any case.
 .
 This package contains the user-space interface to the Netfilter xtables
 kernel framework.
Homepage: https://www.netfilter.org/

Package: libxxhash0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.3-2
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
 xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
 It successfully completes the SMHasher test suite which evaluates collision,
 dispersion and randomness qualities of hash functions. Code is highly portable,
 and hashes are identical on all platforms (little / big endian).
 .
 This package contains the shared library.
Homepage: https://cyan4973.github.io/xxHash

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.5-2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml

Package: libyaml-libyaml-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 101
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.903.0+ds-1
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.11), libyaml-0-2 (>= 0.2.4), libscalar-list-utils-perl
Breaks: libdebian-dep12-perl (<< 0.1.0-4~), lintian (<< 2.119.0~)
Description: Perl interface to libyaml, a YAML implementation
 YAML::XS (old name: YAML::LibYAML) is a Perl interface to Kirill Siminov's
 libyaml library, a YAML Ain't Markup Language (YAML) implementation written
 in C to support the YAML 1.1 specification. The provided Dump and Load
 routines are compatible with the Perl YAML module (see libyaml-perl).
Homepage: https://metacpan.org/release/YAML-LibYAML

Package: libz3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27142
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: z3
Version: 4.13.3-1
Replaces: libz3-dev (<< 4.4.1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), libstdc++6 (>= 14)
Breaks: libz3-dev (<< 4.4.1)
Description: theorem prover from Microsoft Research - runtime libraries
 Z3 is a state-of-the-art theorem prover from Microsoft Research. It can be
 used to check the satisfiability of logical formulas over one or more
 theories. Z3 offers a compelling match for software analysis and verification
 tools, since several common software constructs map directly into supported
 theories.
 .
 This package contains runtime libraries. You shouldn't have to install it
 manually.
Homepage: https://github.com/Z3Prover/z3

Package: libzstd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 847
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.7+dfsg-1
Depends: libc6 (>= 2.34)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd

Package: linux-sysctl-defaults
Status: install ok installed
Priority: important
Section: kernel
Installed-Size: 19
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux-base
Version: 4.12
Description: default sysctl configuration for Linux
 This package contains a sysctl configuration file setting some
 sensible defaults for Linux.

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 15774
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.41-12
Depends: libc-bin (>> 2.41), libc-l10n (>> 2.41), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 171695b82f06f6f00e397da76492556c
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: login
Protected: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 284
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.41-5)
Version: 1:4.16.0-2+really2.41-5
Depends: libpam-modules, libpam-runtime, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1)
Pre-Depends: login.defs (>= 1:4.16.0-1~)
Conffiles:
 /etc/pam.d/login b6129a3c1af42a9977b29f490ecd057e
Description: system login tools
 This package provides support for console-based logins and for
 changing effective user or group IDs, including:
  * login, the program that invokes a user shell on a virtual terminal,
  * nologin, a dummy shell for disabled user accounts,
  * newgrp, a program to change the effective group IDs.
Homepage: https://github.com/util-linux/util-linux

Package: login.defs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 214
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: shadow
Version: 1:4.17.4-2
Replaces: login (<< 1:4.16.0-2~)
Conffiles:
 /etc/login.defs f4e7091da823fd58589e991a2f9c2d96
Description: system user management configuration
 This package provides the login.defs configuration file,
 used by otherwise unrelated tools managing system users.
Homepage: https://github.com/shadow-maint/shadow

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 151
Maintainer: Christian Göttsche <cgzones@googlemail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.22.0-1
Depends: cron | anacron | cron-daemon | systemd-sysv, libacl1 (>= 2.2.23), libc6 (>= 2.38), libpopt0 (>= 1.14), libselinux1 (>= 3.1~)
Suggests: bsd-mailx | mailx
Conffiles:
 /etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171
 /etc/logrotate.conf bb61e48721fc3fb8e58002bce2f9a571
 /etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44
 /etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate

Package: logsave
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 59
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b3
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 292
Maintainer: Boyuan Yang <byang@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20250131-1
Provides: awk
Depends: libc6 (>= 2.38)
Description: Pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Homepage: https://invisible-island.net/mawk/

Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 98
Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 13.0.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mime.types e82584dba9cd994ba21979bdb32d746e
Description: List of standard media types and their usual file extension
 This package installs the configuration file /etc/mime.types, that lists
 standard media types (originally known as "MIME" types) and their usual file
 extension.  This provides a simple way for programs to have a first guess at a
 file's content.  On standard Debian desktop systems, one will also find more
 sophisticated tools, for instance provided by the "file" and "xdg-utils"
 packages.
 .
 The /etc/mime.types file is compiled by hand using mostly information provided
 by the Internet Assigned Numbers Authority (IANA).

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 496
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41-5
Pre-Depends: libblkid1 (= 2.41-5), libc6 (>= 2.38), libmount1 (= 2.41-5), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41-5)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: https://github.com/util-linux/util-linux

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 2839
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: amd64
Version: 8.4-1
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
 /etc/nanorc b30e7a873df86d742e539d3e3f2a3826
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in Pico, including:
  - undo/redo
  - line numbering
  - syntax coloring
  - soft-wrapping of overlong lines
  - selecting text by holding Shift
  - interactive search and replace (with regular expression support)
  - a go-to line (and column) command
  - support for multiple file buffers
  - auto-indentation
  - tab completion of filenames and search terms
  - toggling features while running
  - and full internationalization support
Homepage: https://www.nano-editor.org/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 389
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.5+20250216-2
Replaces: ncurses-term (<< 6.4+20230603)
Provides: ncurses-runtime
Breaks: cryptsetup-initramfs (<< 2:2.6.1), ncurses-term (<< 6.4+20230625), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 665
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.5+20250216-2
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.4+20230603)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 35
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 6.5
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
 /etc/ethertypes 73ca398498fe517e724cc9238612e10d
 /etc/protocols 0c247591a720f534fe543401bd4844d6
 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188
 /etc/services c7e42bc25f943cb5e1e9e7efdbd23783
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
 .
 In particular, it supplies common name-to-number mappings in /etc/services,
 /etc/rpc, /etc/protocols and /etc/ethertypes.

Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 185
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Version: 1.1.3-1
Depends: libnftables1 (= 1.1.3-1), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
 /etc/nftables.conf 4d4241fcd44b9a69b74f69d571f35a20
Description: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/

Package: node-popper2
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 1677
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.11.2-8
Provides: libjs-popper-core (= 2.11.2-8), node-popperjs-core (= 2.4.0)
Description: Javascript library to position poppers in web applications
 A popper is an element on the screen which "pops out" from the natural flow
 of your application.
 .
 This is version 2.x of the Popper library. The older 1.x version is
 available in libjs-popper.js. More recent versions have been renamed
 to Floating UI.
 .
 Common examples of poppers are tooltips, popovers and drop-downs.
Homepage: https://popper.js.org/

Package: odt2txt
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 60
Maintainer: Luis Paulo Linares <lpfllinares@gmail.com>
Architecture: amd64
Version: 0.5-7
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: simple converter from OpenDocument Text to plain text
 odt2txt is a command-line tool which extracts the text out of OpenDocument
 Texts, as produced by OpenOffice.org, KOffice, StarOffice and others.
 .
 odt2txt can also extract text from some file formats similar to OpenDocument
 Text, such as OpenOffice.org XML (*.sxw), which was used by OpenOffice.org
 version 1.x and older StarOffice versions. To a lesser extend, odt2txt may
 be useful to extract content from OpenDocument spreadsheets (*.ods) and
 OpenDocument presentations (*.odp).
 .
 It is small and fast, can output the document in many encodings and
 adopts to your locale.
Homepage: https://github.com/dstosberg/odt2txt/

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 4997
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: ssh-client
Depends: adduser, init-system-helpers (>= 1.66~), passwd, libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
 /etc/ssh/ssh_config 0f05748bffda634f4fb2b23dce8db1c4
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: https://www.openssh.com/

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 3429
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: libpam-modules, libpam-runtime, lsb-base, openssh-client (= 1:10.0p1-7), openssh-sftp-server, procps, ucf, debconf (>= 0.5) | debconf-2.0, runit-helper (>= 2.14.0~), systemd | systemd-standalone-sysusers | systemd-sysusers, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libwrap0 (>= 7.6-4~), libwtmpdb0 (>= 0.13.0), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Breaks: runit (<< 2.1.2-51~)
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
 /etc/pam.d/sshd 72487a556c4f0e23fd25ce21fc294ca8
 /etc/ssh/moduli c98cdde8efe28fedcde0028e61b5a53c
 /etc/sv/ssh/.meta/installed d41d8cd98f00b204e9800998ecf8427e
 /etc/sv/ssh/finish f5f032f6f3e569c821346294d410b636
 /etc/sv/ssh/log/run 63e0ec3e1080dafc68d6d71d42b150a9
 /etc/sv/ssh/run 411f69ac55d12f0c98998552846b1c78
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: https://www.openssh.com/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 173
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:10.0p1-7), libc6 (>= 2.38)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: https://www.openssh.com/

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2491
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.1-1+deb13u1
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.5.0)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf bfdc30bd205b6ca2c15a46b17721c6f2
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://openssl-library.org

Package: openssl-provider-legacy
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 414
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: openssl
Version: 3.5.1-1+deb13u1
Replaces: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5)
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.0.3)
Breaks: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5)
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 This package contains the legacy provider. The OpenSSL legacy provider
 supplies OpenSSL implementations of algorithms that have been deemed legacy.
 Such algorithms have commonly fallen out of use, have been deemed insecure by
 the cryptography community, or something similar.
 For details see OSSL_PROVIDER-legacy man page.
Homepage: https://openssl-library.org

Package: p7zip-full
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 12
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Source: p7zip
Version: 16.02+transitional.1
Depends: 7zip (>= 23.01+dfsg-4~)
Description: transitional package
 This is a transitional package. It can be safely removed.
Homepage: https://7-zip.org/

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4758
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.17.4-2
Replaces: login (<< 1:4.16.0-2~)
Depends: base-passwd (>= 3.6.4), libpam-modules, login.defs, libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.11.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32)
Recommends: sensible-utils
Conffiles:
 /etc/default/useradd e03965d134c26725cbc51a57969da6c9
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 841
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.40.1-6
Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02)
Depends: perl-base (= 5.40.1-6), perl-modules-5.40 (>= 5.40.1-6), libperl5.40 (= 5.40.1-6)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: https://dev.perl.org/perl5/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7811
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.40.1-6
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.42), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libxsloader-perl (<< 0.32), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.42), libscalar-list-utils-perl (= 1:1.63), libsocket-perl (= 2.038), libxsloader-perl (= 0.32), perlapi-5.40.0, perlapi-5.40.1
Pre-Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.9100), libfile-temp-perl (<< 0.2311), libgnupg-interface-perl (<< 1.02-4), libio-socket-ip-perl (<< 0.42), liblexical-failure-perl (<< 0.001000), libmp3-tag-perl (<< 1.13-1.2), libnumber-format-perl (<< 1.76), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libur-perl (<< 0.470+ds-3), libxsloader-perl (<< 0.32), mailagent (<< 1:3.1-81-2), perl (<< 5.40.1~), perl-modules (<< 5.40.1~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.40"
 and "perl-doc").
Homepage: https://dev.perl.org/perl5/

Package: perl-modules-5.40
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 19988
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.40.1-6
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 5.01.02)
Provides: perl-modules
Depends: perl-base (>= 5.40.1-1)
Recommends: perl (>= 5.40.1-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), maildirsync (<< 1.2-2.1), perl (<< 5.40.1~), podlators-perl (<< 5.01.02)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.40' directly, they
 should use `perl' (which depends on `perl-modules-5.40') instead.
Homepage: https://dev.perl.org/perl5/

Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl-openssl-defaults (7)
Version: 7+b2
Provides: dh-sequence-perl-openssl, perl-openssl-abi-3
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.0.0)
Suggests: debhelper
Description: version compatibility baseline for Perl OpenSSL packages
 A subset of Perl XS module packages expose the OpenSSL binary interface
 to Perl code. This can lead to incompatibilities if these packages are
 linked against different versions of OpenSSL.
 .
 This package provides a virtual package "perl-openssl-abi-x" that
 corresponds to the libssl-dev package SONAME it was built against.
 The packages that need to stay compatible with each other can depend
 on this.
 .
 Tools are also provided for generating this dependency with minimum
 hassle. See the instructions in README.Debian.

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 150
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.3.1-2
Provides: pinentry
Depends: libassuan9 (>= 2.0.1), libc6 (>= 2.38), libgpg-error0 (>= 1.14), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/

Package: pmg-api
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1623
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 9.0.1
Depends: apt (>= 2~), clamav-daemon, clamav-freshclam, clamdscan, fetchmail, fonts-font-awesome, libapt-pkg-perl, libarchive-perl (>= 3.4.0-1), libarchive-zip-perl, libauthen-pam-perl, libcompress-bzip2-perl, libdbd-pg-perl, libdbi-perl, libemail-address-xs-perl, libfile-readbackwards-perl, libfile-sync-perl, libfilesys-df-perl, libhtml-parser-perl, libhtml-scrubber-perl, libhtml-tree-perl, libio-compress-perl, libjs-qrcodejs (>= 1.20201119), liblockfile-simple-perl, libmail-spf-perl, libmime-tools-perl, libnet-cidr-lite-perl, libnet-ip-perl, libnet-ldap-perl, libnet-server-perl, libpmg-rs-perl (>= 0.7.7), libproxmox-acme-perl (>= 1.0.8), libproxmox-acme-plugins, libproxmox-rs-perl (>= 0.2.0), libpve-apiclient-perl, libpve-common-perl (>= 9.0.11), libpve-http-server-perl (>= 5.1.1), librrds-perl, libtemplate-perl, libterm-readline-gnu-perl, libxdgmime-perl, openssh-client, openssh-server, p7zip-full, pmg-docs, pmg-gui, pmg-log-tracker (>= 2.5~), pmg-mobile-quarantine-ui (>= 0.2~), postfix (>= 3.7.10), postgresql-17, proxmox-backup-client (>= 2.2.0), proxmox-mini-journalreader (>= 1.3-1), proxmox-spamassassin (>= 4.0.0-2), pve-xtermjs (>= 1.0-1), rrdcached, rsync, rsyslog, shared-mime-info, spf-tools-perl, sudo, tnef, ucf, perl:any
Recommends: antiword, docx2txt, ifupdown2, odt2txt, poppler-utils, proxmox-network-interface-pinning, proxmox-offline-mirror-helper, tesseract-ocr, unrtf
Suggests: zfsutils-linux
Conffiles:
 /etc/apt/sources.list.d/pmg-enterprise.sources e6ea5e35e4eb2c001e702cc050d3fa32
 /etc/initramfs-tools/conf.d/pmg-initramfs.conf 8ba9dc91e71251c6e5542ed3b796b616
 /etc/logrotate.d/pmg-api 42f16d8629923265c9e1819bd03576dd
Description: Proxmox Mailgateway API Server Implementation
 This implements a REST API to configure Proxmox Mailgateway.
Homepage: https://www.proxmox.com

Package: pmg-docs
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 23379
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 9.0.4
Depends: libjs-extjs
Description: Proxmox Mail Gateway Documentation
 This package contains the Proxmox Mail Gateway documentation files.

Package: pmg-gui
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 552
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 5.0.4
Depends: fonts-font-awesome, libjs-extjs (>= 6.0.1), libjs-qrcodejs (>= 1.20201119), pmg-i18n, proxmox-widget-toolkit (>= 4.3.7)
Description: Proxmox Mail Gateway web interface
 Graphical user interface for the Proxmox Mail Gateway.
Homepage: https://www.proxmox.com

Package: pmg-i18n
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1555
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Source: proxmox-i18n
Version: 3.6.1
Description: Internationalization support for Proxmox Mail Gateway
 This package provides the translations into all available languages.
Homepage: https://www.proxmox.com

Package: pmg-log-tracker
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 694
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Source: rust-pmg-log-tracker
Version: 3.0.1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Proxmox Mailgateway Log Tracker
 Tool to scan mail logs.
 .
 This package contains the following binaries built from the Rust crate
 "pmg-log-tracker":
  - pmg-log-tracker
Built-Using: rustc (= 1.85.0+dfsg3-1)
Static-Built-Using: rustc (= 1.85.0+dfsg3-1)
Homepage: https://www.proxmox.com

Package: pmg-mobile-quarantine-ui
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3634
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Multi-Arch: allowed
Version: 0.3.0
Depends: pmg-yew-quarantine-i18n
Description: Mobile web UI for the Proxmox Mail Gateway Quarantine.
 Provides the web UI for Proxmox Mail Gateway (Spam) Quarantine user interface.
 It's written in the rust programming language using the Yew web framework and
 intended to be viewed on smartphones or other devices with smaller displays.
Homepage: https://www.proxmox.com

Package: pmg-yew-quarantine-i18n
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 552
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Source: proxmox-i18n
Version: 3.6.1
Description: Internationalization support for Proxmox Mail Gateway Quartantine GUI
 This package provides the translations into all available languages.
Homepage: https://www.proxmox.com

Package: poppler-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 722
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: poppler
Version: 25.03.0-5
Replaces: pdftohtml, xpdf-reader, xpdf-utils (<< 3.02-2~)
Provides: pdftohtml, xpdf-utils
Depends: libpoppler147 (= 25.03.0-5), libc6 (>= 2.38), libcairo2 (>= 1.17.8), libfreetype6 (>= 2.2.1), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 13.1)
Breaks: xpdf-utils (<< 3.02-2~)
Conflicts: pdftohtml
Description: PDF utilities (based on Poppler)
 Poppler is a PDF rendering library based on Xpdf PDF viewer.
 .
 This package contains command line utilities (based on Poppler) for getting
 information of PDF documents, convert them to other formats, or manipulate
 them:
  * pdfdetach -- lists or extracts embedded files (attachments)
  * pdffonts -- font analyzer
  * pdfimages -- image extractor
  * pdfinfo -- document information
  * pdfseparate -- page extraction tool
  * pdfsig -- verifies digital signatures
  * pdftocairo -- PDF to PNG/JPEG/PDF/PS/EPS/SVG converter using Cairo
  * pdftohtml -- PDF to HTML converter
  * pdftoppm -- PDF to PPM/PNG/JPEG image converter
  * pdftops -- PDF to PostScript (PS) converter
  * pdftotext -- text extraction
  * pdfunite -- document merging tool
Homepage: https://poppler.freedesktop.org/

Package: postfix
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 4016
Maintainer: Debian Postfix Team <team+postfix@tracker.debian.org>
Architecture: amd64
Version: 3.10.4-1~deb13u1
Replaces: mail-transport-agent, postfix-doc (<< 3.9.1-3~), postfix-ldap (<< 3.9.1-5~), postfix-lmdb (<< 3.9.1-5~), postfix-mongodb (<< 3.9.1-5~), postfix-mysql (<< 3.9.1-5~), postfix-pcre (<< 3.9.1-5~), postfix-pgsql (<< 3.9.1-5~), postfix-sqlite (<< 3.9.1-5~)
Provides: mail-transport-agent
Depends: adduser, netbase, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libdb5.3t64, libicu76 (>= 76.1-1~), libnsl2 (>= 1.0), libsasl2-2 (>= 2.1.28+dfsg1), libssl3t64 (>= 3.2.0), libtlsrpt0 (>= 0.5.0rc1)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ca-certificates, ssl-cert, python3
Suggests: libsasl2-modules | dovecot-common, mail-reader, postfix-cdb, postfix-doc, postfix-ldap, postfix-lmdb, postfix-mta-sts-resolver, postfix-mongodb, postfix-mysql, postfix-pcre, postfix-pgsql, postfix-sqlite, procmail, resolvconf, sasl2-bin | dovecot-common, ufw
Conflicts: mail-transport-agent, smail
Conffiles:
 /etc/init.d/postfix 263ba572f2382a8c9ae23cab58d6abde
 /etc/insserv.conf.d/postfix 7fe2d086ff4822fc9fe13adab1090dce
 /etc/network/if-down.d/postfix 30fa6960ccaa8d42730e6de54bec12a5
 /etc/network/if-up.d/postfix 30fa6960ccaa8d42730e6de54bec12a5
 /etc/postfix/main.cf.proto ca856d92fd47cc3031eb5d8d85842617
 /etc/postfix/master.cf.proto b2da49d8a94237ad8f94140150d1e7cd
 /etc/postfix/postfix-files fab278b40bcbbf73b9911338f6c61f14
 /etc/ppp/ip-down.d/postfix 30fa6960ccaa8d42730e6de54bec12a5
 /etc/ppp/ip-up.d/postfix 30fa6960ccaa8d42730e6de54bec12a5
 /etc/resolvconf/update-libc.d/postfix 30fa6960ccaa8d42730e6de54bec12a5
 /etc/rsyslog.d/postfix.conf d8a09827fff2a22311e4dd4a83e95c83
 /etc/ufw/applications.d/postfix 5c7e746dc9255e750b8f50460de11a32
 /etc/postfix/postfix-script newconffile remove-on-upgrade
 /etc/postfix/post-install newconffile remove-on-upgrade
 /etc/network/ip-down.d/postfix newconffile remove-on-upgrade
Description: High-performance mail transport agent
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users.  Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
Homepage: https://www.postfix.org

Package: postgresql-17
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 57318
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: amd64
Version: 17.6-0+deb13u1
Provides: postgresql-17-jit-llvm (= 19), postgresql-contrib-17
Depends: locales | locales-all, postgresql-client-17, postgresql-common (>= 252~), ssl-cert, tzdata, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgssapi-krb5-2 (>= 1.14+dfsg), libicu76 (>= 76.1-1~), libldap2 (>= 2.6.2), libllvm19 (>= 1:19.1.0), liblz4-1 (>= 0.0~r130), libpam0g (>= 0.99.7.1), libpq5 (>= 17~~), libselinux1 (>= 3.1~), libssl3t64 (>= 3.4.0), libstdc++6 (>= 5.2), libsystemd0, libuuid1 (>= 2.16), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: sysstat
Breaks: dbconfig-common (<< 2.0.22~)
Description: The World's Most Advanced Open Source Relational Database
 PostgreSQL, also known as Postgres, is a free and open-source relational
 database management system (RDBMS) emphasizing extensibility and SQL
 compliance. It features transactions with Atomicity, Consistency, Isolation,
 Durability (ACID) properties, automatically updatable views, materialized
 views, triggers, foreign keys, and stored procedures. It is designed to handle
 a range of workloads, from single machines to data warehouses or Web services
 with many concurrent users.
 .
 This package provides the database server for PostgreSQL 17.
Homepage: http://www.postgresql.org/
Postgresql-Catversion: 202406281-1700

Package: postgresql-client-17
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 10420
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: postgresql-17
Version: 17.6-0+deb13u1
Provides: postgresql-client
Depends: libpq5 (>= 17.6), postgresql-client-common (>= 182~), sensible-utils, libc6 (>= 2.38), liblz4-1 (>= 0.0~r127), libreadline8t64 (>= 6.0), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: postgresql-17, postgresql-doc-17
Description: front-end programs for PostgreSQL 17
 This package contains client and administrative programs for
 PostgreSQL: these are the interactive terminal client psql and
 programs for creating and removing users and databases.
 .
 This is the client package for PostgreSQL 17. If you install
 PostgreSQL 17 on a standalone machine, you need the server package
 postgresql-17, too. On a network, you can install this package on
 many client machines, while the server package may be installed on
 only one machine.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/

Package: postgresql-client-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 153
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: postgresql-common
Version: 278
Replaces: pgdg-keyring, postgresql-common (<< 269)
Depends: netbase, perl:any
Breaks: pgdg-keyring, postgresql-common (<< 269)
Conffiles:
 /etc/postgresql-common/user_clusters d2959e6ae6847342be07146ce06af33b
Description: manager for multiple PostgreSQL client versions
 The postgresql-client-common package provides a structure under which
 multiple versions of PostgreSQL client programs may be installed at
 the same time. It provides a wrapper which selects the right version
 for the particular cluster you want to access (with a command line
 option, an environment variable, /etc/postgresql-common/user_clusters,
 or ~/.postgresqlrc).
 .
 PostgreSQL is a fully featured object-relational database management
 system. It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects. Its features include ACID
 transactions, foreign keys, views, sequences, subqueries, triggers,
 outer joins, multiversion concurrency control, and user-defined types
 and functions.

Package: postgresql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 355
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 278
Depends: adduser, debconf (>= 0.5.00) | debconf-2.0, libjson-perl, sysvinit-utils (>= 3.05-4~) | lsb-base, postgresql-client-common (= 278), postgresql-common-dev (= 278), ssl-cert (>= 1.0.11), ucf, perl:any
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: e2fsprogs, logrotate
Breaks: postgresql-9.1 (<< 9.1.1-3~)
Conffiles:
 /etc/init.d/postgresql 1b9da643d7a403248d70e1776fb98458
 /etc/logrotate.d/postgresql-common 101326ef5d138998692ece35109ef1a2
 /etc/postgresql-common/pg_upgradecluster.d/analyze e49cdda4a2dfbfc695a4b7af514c7db9
Description: PostgreSQL database-cluster manager
 The postgresql-common package provides a structure under which
 multiple versions of PostgreSQL may be installed and/or multiple
 clusters maintained at one time.
 .
 The commands provided are pg_conftool, pg_createcluster, pg_ctlcluster,
 pg_dropcluster, pg_lsclusters, pg_renamecluster, pg_upgradecluster,
 pg_virtualenv.
 .
 PostgreSQL is a fully featured object-relational database management
 system. It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects. Its features include ACID
 transactions, foreign keys, views, sequences, subqueries, triggers,
 outer joins, multiversion concurrency control, and user-defined types
 and functions.

Package: postgresql-common-dev
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 329
Maintainer: Debian PostgreSQL Maintainers <team+postgresql@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: postgresql-common
Version: 278
Replaces: postgresql-client-common (<< 269), postgresql-common (<< 269), postgresql-server-dev-all (<< 269)
Depends: libipc-run-perl
Breaks: postgresql-client-common (<< 269), postgresql-common (<< 269), postgresql-server-dev-all (<< 269)
Description: extension build tool for multiple PostgreSQL versions
 The postgresql-server-dev-all package provides the pg_buildext script for
 simplifying packaging of a PostgreSQL extension supporting multiple major
 versions of the product, and dh_make_pgxs which builds a template debian/
 source package directory based on pg_buildext.
 .
 PostgreSQL is a fully featured object-relational database management
 system. It supports a large part of the SQL standard and is designed
 to be extensible by users in many aspects. Its features include ACID
 transactions, foreign keys, views, sequences, subqueries, triggers,
 outer joins, multiversion concurrency control, and user-defined types
 and functions.

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2395
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:4.0.4-9
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.4), libsystemd0 (>= 254), libtinfo6 (>= 6), init-system-helpers (>= 1.29~)
Recommends: psmisc, linux-sysctl-defaults
Breaks: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Conffiles:
 /etc/sysctl.conf newconffile remove-on-upgrade
 /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
 /etc/sysctl.d/README.sysctl 93eda3f215e9d29316f5597cb4551082
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: proxmox-archive-keyring
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 30
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 4.0
Conffiles:
 /etc/apt/trusted.gpg.d/proxmox-release-bookworm.gpg 41558dc019ef90bd0f6067644a51cf5b
 /etc/apt/trusted.gpg.d/proxmox-release-trixie.gpg c94e3775fbafec13fec20f981db61e93
Description: Proxmox APT archive keyring
 This package contains the release keyrings used to sign APT repositories for
 various Proxmox products.

Package: proxmox-backup-client
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 15987
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Source: rust-proxmox-backup
Version: 4.0.15-1
Depends: qrencode, libacl1 (>= 2.2.23), libc6 (>= 2.39), libfuse3-4 (>= 3.17.2), libgcc-s1 (>= 4.2), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5)
Description: Proxmox Backup Client tools
 This package contains the Proxmox Backup client, which provides a
 simple command line tool to create and restore backups.
Homepage: https://www.proxmox.com

Package: proxmox-mailgateway-container
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 9
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Source: proxmox-mailgateway
Version: 9.0.0
Replaces: proxmox-mailgateway
Provides: proxmox-mailgateway
Depends: pmg-api (>= 9.0~), pmg-gui (>= 5.0~), proxmox-archive-keyring
Breaks: proxmox-mailgateway
Description: Proxmox Mail Gateway
 The Proxmox Mail Gateway is an easy to use Open Source SMTP proxy,
 including efficient Spam and virus filters. This is a meta package
 which will install everything needed in a virtualized environment
 where no kernel is necessary.

Package: proxmox-mini-journalreader
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 37
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Version: 1.6
Depends: libc6 (>= 2.38), libsystemd0
Description: Minimal systemd Journal Reader
 A minimal application to read the last X lines of the systemd journal or the
 last X lines before a cursor.

Package: proxmox-spamassassin
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 5738
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Version: 4.0.2-1
Replaces: spamassassin, spamc
Provides: libmail-spamassassin-perl
Depends: curl, debconf (>= 1.2.0), libarchive-tar-perl, libberkeleydb-perl, libdbi-perl, libencode-detect-perl, libgeo-ip-perl, libhtml-parser-perl (>= 3.24), libhttp-date-perl, libio-socket-inet6-perl, libio-socket-ssl-perl, libio-zlib-perl, libmail-dkim-perl (>= 0.25), libmail-spf-perl, libmailtools-perl, libnet-cidr-lite-perl, libnet-dns-perl, libnet-ident-perl, libnetaddr-ip-perl, libsocket6-perl, libsys-hostname-long-perl, libsys-syslog-perl, libwww-perl, netbase, perl (>= 5.8.0), razor, perl:any, libc6 (>= 2.34), zlib1g (>= 1:1.1.4)
Recommends: gpg, libdbd-sqlite3-perl, libmail-dmarc-perl, libnet-libidn2-perl
Breaks: pmg-api (<< 7.2-5)
Conflicts: proxmox-plugin-imageinfo
Conffiles:
 /etc/mail/spamassassin/channel.d/KAM_channel.conf 7e362b44a72bb4fd42c4e425ba7d9171
 /etc/mail/spamassassin/v312.pre 874b9f394616a1d422e28c2795a04413
 /etc/mail/spamassassin/v330.pre 40fb32218509c7f3d00e75033060d082
 /etc/mail/spamassassin/v340.pre 329b5856a4378bb9364add9cabd949de
 /etc/mail/spamassassin/v341.pre e5e4ad5b8aeb2162c4d147ceaa459cc6
 /etc/mail/spamassassin/v343.pre f0992c01180d0d72d45e8bcabd0252fa
 /etc/mail/spamassassin/v401.pre eefce03035e3c0dcc66faffb3213f7eb
 /etc/mail/spamassassin/v402.pre 3e39970e9374bfc50703999cc0d1d7f0
Description: Spam detector and markup engine
 Mail::SpamAssassin is a module to identify spam using several methods
 including text analysis, internet-based realtime blacklists, statistical
 analysis, and internet-based hashing algorithms.
 .
 Using its rule base, it uses a wide range of heuristic tests on mail headers
 and body text to identify "spam", also known as unsolicited bulk email.
 .
 Once identified, the mail can then be tagged as spam for later filtering
 using the user's own mail user-agent application or at the mail transfer
 agent.
 .
 If you wish to use a command-line filter tool, try the spamassassin
 or the spamd/spamc tools provided.

Package: proxmox-termproxy
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 549
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: amd64
Multi-Arch: allowed
Version: 2.0.2
Replaces: pve-xtermjs (<< 5.3.0~)
Depends: libc6 (>= 2.39), libgcc-s1 (>= 4.2)
Recommends: pve-xtermjs
Breaks: pve-xtermjs (<< 5.3.0~)
Description: Wrapper proxy for executing programs in the system terminal
 This package provides an wrapper for running commands in a system terminal,
 redirecting input via a special protocol and returning the PTY output 1:1.
 It's used for the backend of the xterm.js based host and virtual guest
 consoles in Proxmox projects like Proxmox VE or Proxmox Backup Server.
Homepage: https://www.proxmox.com

Package: proxmox-widget-toolkit
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 1221
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 5.0.6
Description: Core Widgets and ExtJS Helper Classes for Proxmox Web UIs
 The base framework providing widgets, models, and general utilities for the
 ExtJS based Web UIs of various Proxmox projects
Homepage: https://www.proxmox.com

Package: pve-xtermjs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1901
Maintainer: Proxmox Support Team <support@proxmox.com>
Architecture: all
Version: 5.5.0-2
Depends: proxmox-termproxy
Description: HTML/TypeScript based fully-featured terminal for Proxmox projects
 Provides the xterm.js frontend for the terminal feature in Proxmox projects'
 web UI's, like for host administration or Proxmox VE containers shells.
Homepage: https://www.proxmox.com

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.13.5-1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler, python3-supported-max (= 3.13), python3-supported-min (= 3.13)
Depends: python3.13 (>= 3.13.5-1~), libpython3-stdlib (= 3.13.5-1)
Pre-Depends: python3-minimal (= 3.13.5-1)
Suggests: python3-doc (>= 3.13.5-1), python3-tk (>= 3.13.5-1~), python3-venv (>= 3.13.5-1)
Conflicts: python3-distutils
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.13).
Homepage: https://www.python.org/

Package: python3-autocommand
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 61
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: python-autocommand
Version: 2.2.2-3
Depends: python3:any
Description: library to generate argparse parsers from function signatures
 Autocommand is a library to automatically generate and run simple argparse
 parsers from function signatures.
 .
 It turns a function into a command-line program, converting the function's
 parameter signature into command-line arguments, and automatically running
 the function with these arguments if the module was called as __main__.
 Usage messages, invoked with -h or --help, are also created automatically.
Homepage: https://github.com/Lucretiel/autocommand

Package: python3-inflect
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-inflect
Version: 7.3.1-2
Depends: python3-more-itertools, python3-typeguard, python3-typing-extensions | python3-supported-min (>= 3.9), python3:any
Description: Generate plurals, singular nouns, ordinals, indefinite articles (Python 3)
 The inflect Python module correctly generates plurals, singular nouns,
 ordinals and indefinite articles. It can also convert numbers to words.
 .
 This package contains the Python 3 version of this module.
Homepage: https://github.com/jaraco/inflect

Package: python3-jaraco.context
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 36
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: jaraco.context
Version: 6.0.1-1
Depends: python3-setuptools | python3-supported-min (>= 3.12), python3:any
Description: jaraco contextlib extensions
 Various context managers extending functionality of Python's
 contextlib, mostly needed as a dependency of other projects
 involving the same upstream developer.
Homepage: https://github.com/jaraco/jaraco.context

Package: python3-jaraco.functools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 48
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: python-jaraco.functools
Version: 4.1.0-1
Depends: python3-more-itertools, python3:any
Description: additional functools in the spirit of stdlib's functools
 Jaraco.functools provides additional functools in the spirit of stdlib's
 functools, mostly needed as a dependency of other projects by the same
 upstream developer such as the 'tempora' module.
Homepage: https://github.com/jaraco/jaraco.functools

Package: python3-jaraco.text
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 48
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: jaraco.text
Version: 4.0.0-1
Depends: python3-autocommand, python3-importlib-resources | python3-supported-min (>= 3.9), python3-jaraco.context, python3-jaraco.functools, python3-more-itertools, python3:any, python3-inflect
Description: jaraco text manipulation functions
 Text manipulation functions and classes, mostly needed as a dependency
 of other projects involving the same upstream developer, including
 cherrypy.
Homepage: https://github.com/jaraco/jaraco.text

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 112
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.13.5-1
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.13-minimal (>= 3.13.5-1~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.13-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3

Package: python3-more-itertools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 292
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: more-itertools
Version: 10.7.0-1
Depends: python3:any
Description: library with routines for operating on iterables, beyond itertools (Python 3)
 Python's itertools library is a gem - you can compose elegant solutions
 for a variety of problems with the functions it provides.
 More-itertools collects additional building blocks, recipes,
 and routines for working with Python iterables.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/more-itertools/more-itertools/

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 696
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 78.1.1-0.1
Replaces: python3-setuptools (<< 75.2)
Depends: python3-autocommand, python3-inflect, python3-jaraco.context, python3-jaraco.functools, python3-more-itertools, python3:any
Suggests: python3-setuptools
Breaks: python3-setuptools (<< 75.2)
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools

Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3897
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 78.1.1-0.1
Depends: python3-pkg-resources (= 78.1.1-0.1), python3-importlib-metadata | python3-supported-min (>= 3.10), python3-jaraco.text, python3-more-itertools, python3-typeguard, python3-typing-extensions, python3-zipp, python3:any
Suggests: python-setuptools-doc
Breaks: python3-wheel (<< 0.46.0)
Description: Python3 Distutils Enhancements
 Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 62
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.17.0-1
Depends: python3:any
Description: Python 2 and 3 compatibility library
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
Homepage: https://github.com/benjaminp/six

Package: python3-systemd
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 212
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: python-systemd (235-1)
Version: 235-1+b6
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.38), libsystemd0 (>= 246)
Description: Python 3 bindings for systemd
 This package contains Python 3 bindings for native access to the
 systemd facilities.
 .
 Functionality is separated into a number of modules:
  * systemd.journal supports sending of structured messages to the
    journal and reading journal files
  * systemd.daemon wraps parts of libsystemd useful for writing daemons
    and socket activation
  * systemd.id128 provides functions for querying machine and boot
    identifiers and a list of message identifiers provided by systemd
  * systemd.login wraps parts of libsystemd used to query logged in
    users and available seats and machines
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: python3-typeguard
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 167
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-typeguard
Version: 4.4.2-1
Depends: python3-importlib-metadata | python3-supported-min (>= 3.10), python3-typing-extensions (>= 4.10.0), python3:any
Description: Run-time type checker for Python
 This library provides run-time type checking for functions defined with
 argument type annotations. This can be done in one of three ways:
  * calling check_argument_types() from within the function body
  * decorating the function with @typechecked
  * using `with TypeChecker('packagename')`
 .
 This package installs the library for Python 3.
Homepage: https://github.com/agronholm/typeguard

Package: python3-typing-extensions
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 515
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-typing-extensions
Version: 4.13.2-1
Depends: python3:any
Description: Backported and Experimental Type Hints for Python
 The "typing_extensions" module serves two related purposes:
 .
 1. Enable use of new type system features on older Python versions.
 2. Enable experimentation with new type system PEPs before they are accepted
    and added to the "typing" module.
 .
 "typing_extensions" is treated specially by static type checkers such as mypy
 and pyright. Objects defined in "typing_extensions" are treated the same
 way as equivalent forms in "typing".
Homepage: https://typing-extensions.readthedocs.io/en/latest/

Package: python3-zipp
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 45
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-zipp
Version: 3.21.0-1
Depends: python3:any
Description: pathlib-compatible Zipfile object wrapper - Python 3.x
 A backport of the Path object to older versions of Python.
 It's pathlib-compatible interface for zip files using zipfile object inside.
 .
 This package contains Python 3.x module.
Homepage: https://github.com/jaraco/zipp

Package: python3.13
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 830
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.13.5-2
Depends: python3.13-minimal (= 3.13.5-2), libpython3.13-stdlib (= 3.13.5-2), media-types | mime-support, tzdata
Recommends: ca-certificates
Suggests: python3.13-venv, python3.13-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.13)
 Python is a high-level, interactive, object-oriented language. Its 3.13 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: python3.13-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6764
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.13
Version: 3.13.5-2
Depends: libpython3.13-minimal (= 3.13.5-2), libexpat1 (>= 2.6.0), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.38)
Recommends: python3.13
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.13)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.13-minimal/README.Debian for a list of the modules
 contained in this package.
Cnf-Visible-Pkgname: python3.13

Package: qrencode
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 79
Maintainer: NIIBE Yutaka <gniibe@fsij.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.1.1-2
Depends: libc6 (>= 2.34), libpng16-16t64 (>= 1.6.2), libqrencode4 (>= 3.3.0)
Description: QR Code encoder into PNG image
 Qrencode is a utility software using libqrencode to encode string data in
 a QR Code and save as a PNG or an EPS image.
Homepage: https://fukuchi.org/works/qrencode/index.html.en

Package: razor
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 329
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:2.85-11
Provides: librazor2-perl
Depends: libc6 (>= 2.4), libdigest-hmac-perl, libdigest-md5-perl, libmime-base64-perl, libnet-dns-perl, perl (>= 5.40.1-3), libtest-simple-perl, liburi-perl, perlapi-5.40.1
Conffiles:
 /etc/logcheck/ignore.d.server/razor 80dec951c29e164d8b160e2c7f30ce39
 /etc/logrotate.d/razor e08915712e2757830cb9b2ce8c00db62
 /etc/razor/razor-agent.conf 436d9c5d9374164c279738bad621a56c
Description: spam-catcher using a collaborative filtering network
 Vipul's Razor is a distributed, collaborative, spam detection and
 filtering network. Razor establishes a distributed and constantly updating
 catalogue of spam in propagation. This catalogue is used by clients to
 filter out known spam. On receiving a spam, a Razor Reporting Agent (run
 by an end-user or a troll box) calculates and submits a 20-character unique
 identification of the spam (a SHA Digest) to its closest Razor
 Catalogue Server. The Catalogue Server echos this signature to other
 trusted servers after storing it in its database. Prior to manual
 processing or transport-level reception, Razor Filtering Agents (end-users
 and MTAs) check their incoming mail against a Catalogue Server and filter
 out or deny transport in case of a signature match. Catalogued spam, once
 identified and reported by a Reporting Agent, can be blocked out by the
 rest of the Filtering Agents on the network.
Homepage: https://razor.sourceforge.net

Package: readline-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.2-6
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html

Package: rrdcached
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 278
Maintainer: Debian RRDtool Team <team+rrdtool@tracker.debian.org>
Architecture: amd64
Source: rrdtool
Version: 1.7.2-4.2+pve3
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.12.0), librrd8t64 (>= 1.7.0)
Conffiles:
 /etc/default/rrdcached 13639b2112daa2b44422fbce7674f5af
Description: data caching daemon for RRDtool
 RRDCacheD is a daemon that receives updates to existing RRD files, accumulates
 them and, if enough have been received or a defined time has passed, writes
 the updates to the RRD file. The daemon was written with big setups in mind.
 Those setups usually run into I/O related problems. RRDCacheD's goal is to
 alleviate these problems.
Homepage: https://oss.oetiker.ch/rrdtool/

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 809
Maintainer: Samuel Henrique <samueloph@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.4.1+ds1-5
Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3t64 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
 /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: https://rsync.samba.org/

Package: rsyslog
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1999
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Version: 8.2504.0-1
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.38), libestr0 (>= 0.1.9), libfastjson4 (>= 0.99.8), liblognorm5 (>= 2.0.3), libsystemd0 (>= 246), libuuid1 (>= 2.16), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: logrotate
Suggests: rsyslog-doc, rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-elasticsearch, rsyslog-kafka, rsyslog-hiredis, rsyslog-snmp, rsyslog-kubernetes, rsyslog-docker, rsyslog-clickhouse, rsyslog-openssl | rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/logcheck/ignore.d.server/rsyslog 7611318f22297810bc84657d598136c9
 /etc/logrotate.d/rsyslog 3f26282ac0106961634fe4efb9edc3f4
 /etc/rsyslog.conf b71ef62df5c0fe31ee99be6581cb1810
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: https://www.rsyslog.com/

Package: runit-helper
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 21
Maintainer: Lorenzo Puliti <plorenzo@disroot.org>
Architecture: all
Multi-Arch: foreign
Source: dh-runit
Version: 2.16.4
Description: dh-runit implementation detail
 runit-helper provides code, which actually perform actions on system
 users on behalf of dh-runit package. This separation allows packages
 take advantage of improvement or fixes in 'dh-runit' without
 rebuilding.
 .
 This package is implementation detail of 'dh-runit'. It should never
 be installed manually. No assumption about its content can be made.
Homepage: https://salsa.debian.org/debian/dh-runit

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 987
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9-2
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 63
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.25
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, pager, or terminal emulator.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager sensible-terminal

Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 5143
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shared-mime-info (2.4-5)
Version: 2.4-5+b2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libglib2.0-0t64 (>= 2.76.0), libstdc++6 (>= 12), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and Xfce use this database.
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info

Package: spf-tools-perl
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 77
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Source: mail-spf-perl
Version: 3.20250505-1
Depends: perl:any, libmail-spf-perl (>= 3.20250505-1)
Description: SPF tools (spfquery, spfd) based on the Mail::SPF Perl module
 A collection of Sender Policy Framework (SPF) tools that are based on the
 fully RFC-conforming Mail::SPF Perl module.  The following tools are included
 in this package:
 .
   * spfquery:  A command-line tool for performing SPF checks.
   * spfd:      A daemon for services that perform SPF checks frequently.
Homepage: https://metacpan.org/release/Mail-SPF

Package: sqv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1854
Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: rust-sequoia-sqv
Version: 1.3.0-3
Depends: libc6 (>= 2.38), libgcc-s1 (>= 4.2), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64, libnettle8t64 (>= 3.9~)
Description: OpenPGP signature verification program from Sequoia
 sqv is a single-purpose CLI for verifying OpenPGP signatures, designed
 to be used from scripts.
 .
 OpenPGP users looking for the full range of OpenPGP functionality
 will usually prefer sq, the Sequoia PGP project's primary CLI, which
 provides a richer signature verification interface and other
 functionality like certificate management.
Built-Using: rust-buffered-reader (= 1.3.1-2), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-sequoia-openpgp (= 2.0.0-2), rust-sequoia-policy-config (= 0.8.0-1), rustc (= 1.85.0+dfsg3-1)
Static-Built-Using: rust-aho-corasick (= 1.1.3-1), rust-anstream (= 0.6.15-1), rust-anstyle (= 1.0.8-1), rust-anstyle-parse (= 0.2.1-1), rust-anstyle-query (= 1.0.0-1), rust-anyhow (= 1.0.95-1), rust-argon2 (= 0.5.3-1), rust-base64 (= 0.22.1-1), rust-base64ct (= 1.6.0-1), rust-bitflags (= 2.8.0-1), rust-blake2 (= 0.10.6-2), rust-block-buffer (= 0.10.4-1), rust-buffered-reader (= 1.3.1-2), rust-cfg-if (= 1.0.0-1), rust-chrono (= 0.4.39-2), rust-clap (= 4.5.23-1), rust-clap-builder (= 4.5.23-1), rust-clap-lex (= 0.7.4-1), rust-colorchoice (= 1.0.0-1), rust-cpufeatures (= 0.2.16-1), rust-crypto-common (= 0.1.6-1), rust-digest (= 0.10.7-2), rust-dyn-clone (= 1.0.16-1), rust-generic-array (= 0.14.7-1), rust-getrandom (= 0.2.15-1), rust-iana-time-zone (= 0.1.63-1), rust-idna (= 1.0.3-2), rust-idna-adapter (= 1.1.0-1), rust-idna-mapping (= 1.0.0-1), rust-lalrpop-util (= 0.20.0-1), rust-lazy-static (= 1.5.0-1), rust-libc (= 0.2.169-1), rust-linux-raw-sys (= 0.4.14-1), rust-memchr (= 2.7.4-1), rust-memsec (= 0.7.0-1), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-num-traits (= 0.2.19-2), rust-password-hash (= 0.5.0-1), rust-rand-core (= 0.6.4-2), rust-regex (= 1.11.1-2), rust-regex-automata (= 0.4.9-2), rust-regex-syntax (= 0.8.5-1), rust-rustix (= 0.38.37-4), rust-sequoia-openpgp (= 2.0.0-2), rust-sequoia-policy-config (= 0.8.0-1), rust-serde (= 1.0.217-1), rust-sha1collisiondetection (= 0.3.2-1), rust-smallvec (= 1.13.2-1), rust-strsim-0.10 (= 0.10.0-4), rust-subtle (= 2.6.1-1), rust-terminal-size (= 0.4.1-2), rust-thiserror (= 2.0.11-1), rust-thiserror-1 (= 1.0.69-1), rust-tinyvec (= 1.6.0-2), rust-tinyvec-macros (= 0.1.0-1), rust-toml-0.5 (= 0.5.11-4), rust-typenum (= 1.17.0-3), rust-unicode-bidi (= 0.3.17-1), rust-unicode-joining-type (= 1.0.0-1), rust-unicode-normalization (= 0.1.24-1), rust-utf8-iter (= 1.0.4-1), rust-utf8parse (= 0.2.1-1), rust-xxhash-rust (= 0.8.15-1), rustc (= 1.85.0+dfsg3-1)
Homepage: https://sequoia-pgp.org/

Package: ssh
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 152
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7
Depends: openssh-client (>= 1:10.0p1-7), openssh-server (>= 1:10.0p1-7)
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.
Homepage: https://www.openssh.com/

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 61
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.1.3
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 6704
Maintainer: Debian Sudo Maintainers <sudo@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9.16p2-3
Replaces: sudo-ldap
Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.0.2), libpam-modules
Pre-Depends: init-system-helpers (>= 1.54~)
Conflicts: sudo-ldap
Conffiles:
 /etc/init.d/sudo 4fd40c92739a3bb2242df7cc6af126df
 /etc/pam.d/sudo 7fa5090826481c517f23faa1e21c77a8
 /etc/pam.d/sudo-i 95199b1f3d5a60bcf98058d9f8b70e70
 /etc/sudo.conf b802577e70ce0df065aa94feb3d0566f
 /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2
 /etc/sudoers da8bee36494c904ba767f0dd58920878
 /etc/sudoers.d/README bb1eba13940f331e91cfb9294d86a04f
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9946
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 257.8-1~deb13u2
Provides: systemd-sysusers (= 257.8-1~deb13u2), systemd-tmpfiles (= 257.8-1~deb13u2)
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libc6 (>= 2.41), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.4.0), libsystemd0 (= 257.8-1~deb13u2), mount
Pre-Depends: libc6 (>= 2.38), libsystemd-shared (= 257.8-1~deb13u2)
Recommends: default-dbus-system-bus | dbus-system-bus, linux-sysctl-defaults, systemd-timesyncd | time-daemon, systemd-cryptsetup
Suggests: systemd-container, systemd-homed, systemd-userdbd, systemd-boot, systemd-resolved, systemd-repart, libtss2-tcti-device0, polkitd
Breaks: dracut-core (<< 102-2~), less (<< 563), sicherboot (<< 0.1.6)
Conflicts: consolekit, libpam-ck-connector, opensysusers (<< 0.7.3-4.1~), systemd-shim
Conffiles:
 /etc/security/limits.d/10-coredump-debian.conf bb509d1c69a68c82ecdcd22c9b1c7d04
 /etc/systemd/journald.conf 226f112ac6367d270670e2c2dd9471d7
 /etc/systemd/logind.conf 2f26319b0e390d5ddd383d04ced8ea00
 /etc/systemd/networkd.conf c8ffe444e15b1f9e8be31e54a6eaf800
 /etc/systemd/pstore.conf 8086c035fbf3bde72f2339a6ee50d2a4
 /etc/systemd/sleep.conf 894f85ddfb666958fad7b7217b7f48c2
 /etc/systemd/system.conf 9c032a82b936a8513e74296bf491a538
 /etc/systemd/user.conf c13845a7cbc3e115e4c23949a3e2b917
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://systemd.io

Package: systemd-sysv
Protected: yes
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 96
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.8-1~deb13u2
Replaces: sysvinit-core
Depends: systemd (= 257.8-1~deb13u2)
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: bfh-container (<< 20211009-22~), file-rc, initscripts, insserv, molly-guard (<< 0.8.2~), orphan-sysvinit-scripts, progress-linux-container (<< 20221002-11~), startpar, systemd-shim, sysv-rc, sysvinit-core
Description: system and service manager - SysV compatibility symlinks
 This package provides manual pages and compatibility symlinks needed for
 systemd to replace sysvinit.
 .
 Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd.
Homepage: https://systemd.io

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 104
Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.14-4
Replaces: lsb-base
Provides: lsb-base (= 11.1.0)
Depends: libc6 (>= 2.38)
Conflicts: lsb-base (<< 11.3~)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 init-d-script, fstab-decode, killall5, pidof
 .
 It also contains the library scripts sourced by init-d-script and other
 initscripts that were formerly in lsb-base.
Homepage: https://github.com/slicer69/sysvinit

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3085
Maintainer: Janos Lenart <ocsi@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.35+dfsg-3.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Homepage: https://www.gnu.org/software/tar/

Package: tesseract-ocr
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 2279
Maintainer: Alexander Pozdnyakov <almipo@mail.ru>
Architecture: amd64
Source: tesseract (5.5.0-1)
Version: 5.5.0-1+b1
Replaces: tesseract-ocr-data
Depends: libarchive13t64 (>= 3.2.1), libc6 (>= 2.38), libcairo2 (>= 1.2.4), libcurl4t64 (>= 7.16.2), libfontconfig1 (>= 2.12.6), libgcc-s1 (>= 3.0), libglib2.0-0t64 (>= 2.12.0), libharfbuzz0b (>= 1.2.6), libicu76 (>= 76.1-1~), libleptonica6 (>= 1.75.3), libpango-1.0-0 (>= 1.44.3), libpangocairo-1.0-0 (>= 1.22.0), libstdc++6 (>= 13.1), libtesseract5 (= 5.5.0-1+b1), tesseract-ocr-eng (>= 4.0.9~), tesseract-ocr-osd (>= 4.0.9~)
Description: Tesseract command line OCR tool
 Tesseract is an open source Optical Character Recognition (OCR)
 Engine. It can be used directly, or (for programmers) using an API to
 extract printed text from images. It supports a wide variety of
 languages. This package includes the command line tool.
Homepage: https://github.com/tesseract-ocr/

Package: tesseract-ocr-eng
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 4032
Maintainer: Alexander Pozdnyakov <almipo@mail.ru>
Architecture: all
Multi-Arch: foreign
Source: tesseract-lang
Version: 1:4.1.0-2
Replaces: tesseract-ocr-data (<< 2)
Provides: tesseract-ocr-lang, tesseract-ocr-language
Recommends: tesseract-ocr (>= 4.9.9)
Breaks: tesseract-ocr (<< 4.9.9)
Description: tesseract-ocr language files for English
 Tesseract is an open source Optical Character Recognition (OCR)
 Engine. It can be used directly, or (for programmers) using an API to
 extract printed text from images. This package contains the data
 needed for processing images in English language.
Homepage: https://github.com/tesseract-ocr/

Package: tesseract-ocr-osd
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 10331
Maintainer: Alexander Pozdnyakov <almipo@mail.ru>
Architecture: all
Multi-Arch: foreign
Source: tesseract-lang
Version: 1:4.1.0-2
Replaces: tesseract-ocr-data (<< 2)
Provides: tesseract-ocr-lang, tesseract-ocr-language
Recommends: tesseract-ocr (>= 4.9.9)
Breaks: tesseract-ocr (<< 4.9.9)
Description: tesseract-ocr language files for script and orientation
 Tesseract is an open source Optical Character Recognition (OCR)
 Engine. It can be used directly, or (for programmers) using an API to
 extract printed text from images. This package contains the data
 needed for identifying script and orientation.
Homepage: https://github.com/tesseract-ocr/

Package: tnef
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 103
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 1.4.18-4
Depends: libc6 (>= 2.34)
Recommends: mailcap, media-types
Description: Tool to unpack MIME application/ms-tnef attachments
 TNEF is a program for unpacking MIME attachments of type
 "application/ms-tnef". This is typically a Microsoft only attachment.
 .
 The TNEF program allows one to unpack the attachments which were
 encapsulated into the TNEF attachment, thus alleviating the need to use
 Microsoft Outlook to view the attachment.
Homepage: https://github.com/verdammelt/tnef

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1357
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2025b-4+deb13u1
Replaces: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9)
Provides: tzdata-trixie
Depends: debconf (>= 0.5) | debconf-2.0
Breaks: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9)
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 148
Maintainer: Mark Hindley <leepen@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0052
Depends: debconf (>= 0.5) | debconf-2.0, libtext-wrapi18n-perl, procps, sensible-utils
Conffiles:
 /etc/ucf.conf 80d388cee26f58a54338acfd8e708c7e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9995
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.8-1~deb13u2
Replaces: systemd (<< 255~rc1-4~)
Depends: libblkid1 (>= 2.37.2), libc6 (>= 2.38), libsystemd-shared (= 257.8-1~deb13u2), systemd | systemd-standalone-sysusers | systemd-sysusers, libkmod2, libudev1 (= 257.8-1~deb13u2)
Breaks: systemd (<< 257.8-1~deb13u2)
Conflicts: systemd (<< 255~rc1-4~)
Conffiles:
 /etc/udev/iocost.conf fad2a2c4c34d796b6802bc62c19cc4ae
 /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://systemd.io

Package: unrtf
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 148
Maintainer: Willi Mann <willi@debian.org>
Architecture: amd64
Version: 0.21.10-clean-1
Replaces: rtf2htm
Depends: libc6 (>= 2.14)
Conflicts: rtf2htm
Description: RTF to other formats converter
 UnRTF is a moderately complicated converter from RTF to other formats,
 including HTML, LaTeX, and text. Converting to HTML, it supports tables,
 fonts, colors, embedded images,  hyperlinks, paragraph alignment among other
 things. All other conversions are "alpha"--just begun.
Homepage: http://www.gnu.org/software/unrtf/

Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 387
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-29
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: https://infozip.sourceforge.net/UnZip.html

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 4961
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.41-5
Replaces: hardlink
Provides: hardlink
Pre-Depends: libpam-modules, libpam-runtime, libblkid1 (= 2.41-5), libc6 (>= 2.41), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), liblastlog2-2 (= 2.41-5), libmount1 (= 2.41-5), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41-5), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (= 2.41-5)
Recommends: sensible-utils
Suggests: dosfstools, kbd, util-linux-extra, util-linux-locales, wtmpdb
Conflicts: hardlink
Conffiles:
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
 /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Homepage: https://github.com/util-linux/util-linux

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1864
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.1.1230-2
Replaces: vim-runtime (<< 2:9.0.1658-1~)
Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-runtime (<< 2:9.0.1658-1~)
Conffiles:
 /etc/vim/vimrc 268a4e1ec0b630f6b75c83f618229c88
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: https://www.vim.org/

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1831
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: amd64
Source: vim
Version: 2:9.1.1230-2
Provides: editor
Depends: vim-common (= 2:9.1.1230-2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny 2eef1685cce57398be3763940dbced84
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-motif, or vim-gtk3.
Homepage: https://www.vim.org/

Package: whiptail
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 61
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.25-1
Depends: libc6 (>= 2.38), libnewt0.52 (>= 0.52.25), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://pagure.io/newt

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 173
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.3.dfsg+really1.3.1-1)
Version: 1:1.3.dfsg+really1.3.1-1+b1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2023.20230311.66589-8)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

